Permanently install banding and cut off the tail of the clamp being formed with the BISupply | Steel Banding Tensioner Tool with Cutter. It is a steel strap tensioner that can be used as a hose clamp tool or bundler for lumber, cables, pipes, and more. Use your existing stainless steel and galvanized carbon steel bands from 4.76mm to 19mm in size. As long as you have the correct bands, this strapping banding tool works with any application. It tensions over 2,000 pounds (907 kg) of force and is drop forged with epoxy powder-coat finish for maximum strength and longevity that resists rust and corrosion. To use, thread your band through your buckle, tension the band, and then once tension point is reached, lock this tool and cut off using the built-in cutter. Band and buckle not included WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- [Install Banding with Ease]: Use the BISupply Spin Tight Steel Strapping Tool Tensioner and Cut-Off Set to permanently install banding with a buckle and cut off the tail of the clamp being formed with the built-in cutter; Use to bundle lumber, cables, pipes, hoses, and more for transport or storage
- [Fits Your Bands]: Banding tool strapping tensioners tool works with stainless steel and galvanized carbon steel bands; Accepts band sizes 1/5-inch to 3/4-inch (4.76mm to 19mm); 0.4mm to 0.8mm thickness strap; Most commonly used sizes are 1/2-inch, 5/8-inch, 3/4-inch; Band and buckle not included
- [Built to Last]: Tensions over 2,000 pounds (907 kg) of force; Retaining ring clip on the end of the threaded pull rod keeps parts intact and the crank in place; Drop forged with epoxy powder-coat finish for maximum strength and longevity that resists rust and corrosion
- [Easy to Use]: Use correct band size and buckle for your project by measuring length from roll band (or use a pre-cut clamp) and installing a buckle; Thread band through the buckle, then tension band; At tension point, lock stainless steel banding tool kit for strapping and cut it off using the built-in cutter
- [Grip Comfortably]: Steel banding strap kit includes a 6 x 0.4-inch (15.2 x 1cm) spring-loaded rubber-coated lever to move the built-in cutter and 8 x 2.6-inch (20.3 x 6.6cm) spin handle for maximum grip and comfort for less user fatigue and more productivity
- [Install Banding with Ease]: Use the BISupply Spin Tight Steel Strapping Tool Tensioner and Cut-Off Set to permanently install banding with a buckle and cut off the tail of the clamp being formed with the built-in cutter; Use to bundle lumber, cables, pipes, hoses, and more for transport or storage
- [Fits Your Bands]: Banding tool strapping tensioners tool works with stainless steel and galvanized carbon steel bands; Accepts band sizes 1/5-inch to 3/4-inch (4.76mm to 19mm); 0.4mm to 0.8mm thickness strap; Most commonly used sizes are 1/2-inch, 5/8-inch, 3/4-inch; Band and buckle not included
- [Built to Last]: Tensions over 2,000 pounds (907 kg) of force; Retaining ring clip on the end of the threaded pull rod keeps parts intact and the crank in place; Drop forged with epoxy powder-coat finish for maximum strength and longevity that resists rust and corrosion
- [Easy to Use]: Use correct band size and buckle for your project by measuring length from roll band (or use a pre-cut clamp) and installing a buckle; Thread band through the buckle, then tension band; At tension point, lock stainless steel banding tool kit for strapping and cut it off using the built-in cutter
- [Grip Comfortably]: Steel banding strap kit includes a 6 x 0.4-inch (15.2 x 1cm) spring-loaded rubber-coated lever to move the built-in cutter and 8 x 2.6-inch (20.3 x 6.6cm) spin handle for maximum grip and comfort for less user fatigue and more productivity
