A.Main Function

Electrical parameter measurement function (voltage, current,power, impedance,internal resistance , capacity,dump energy,accumulate energy consumption,running time)

B. Appearance and Key fu...

Buy Now From Amazon

A.Main Function

Electrical parameter measurement function (voltage, current,power, impedance,internal resistance , capacity,dump energy,accumulate energy consumption,running time)

B. Appearance and Key function

Display interface is large-screen LCD, it can display eight parameters at the same time.

1.Power: Measuring range: 0-60000W, Starting measure power: 0.2W

2.Impedance: Measuring range: 0-1000Ω

3.Voltage: Measuring range: 0-200V. (when the test voltage is <8V, please use the independent power supply mode)

4.Current: Measuring range: 0-300A. The starting test current: 20mA

5. Internal resistance:Measuring range: 0-999mΩ

6.Capacity: Measuring range: 0-1000AH

7.dump energy:Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.

8. accumulate energy consumption:1 Measuring range: 0~9999kWh Note: 1Wh=0.001kWh=0.001 Kilowatt

9. Running time:Measuring range: 0 ~ 999 hour (without load the time will not accumulate)



  • 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-300A,Power 0-60000W,Impedance 0-1000Ω,Internal Resistance 0-999mΩ,Capacity 0-1000AH,Dump energy 0~9999kWh,Running time 0-999 hour.
  • 2.LCD Display:Large-screen LCD with a full sight of 180° view,The blue backlight can be turned on/off manually.
  • 3.Two modes: normal display mode and dormant mode.
  • 4.No screws design: Press down terminal buttons, insert bare thread and release.
  • 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
  • 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-300A,Power 0-60000W,Impedance 0-1000Ω,Internal Resistance 0-999mΩ,Capacity 0-1000AH,Dump energy 0~9999kWh,Running time 0-999 hour.
  • 2.LCD Display:Large-screen LCD with a full sight of 180° view,The blue backlight can be turned on/off manually.
  • 3.Two modes: normal display mode and dormant mode.
  • 4.No screws design: Press down terminal buttons, insert bare thread and release.
  • 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.

Similar Products

ISDT BattGo BG-8S Battery Meter, LCD Display Digital Battery Capacity Checker Battery Balancer Battery Tester for LiPo/Life/Li-ion/NiMH/NicdAC Current Voltage Amperage Power Energy Panel Meter LCD Digital Display Ammeter Voltmeter Multimeter with Split Core Current Transformer CT AC 80-260V 100A (AC 100A Meter(Split Core Transformer))SELTERM 10 Pack 2 Gauge 2 AWG 3/8Ampper Battery Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV and Boat (On/Off)IWISS Battery Cable Lug Crimping Tool from AWG 8-1/0 with Cable CutterBlue Sea Systems m-Series Mini On-Off Battery Switch with Knob- RedOnkuey 10Pcs 8S JST-XH 9Pin 26AWG Balance Extention Lead Wire for RC Lipo Battery