Long Enough for any vehicle. can be cut to any size
- ACCENT DRL AND TURN SIGNAL COMBO LIGHT: A striking white liner with running Lights and Sequential Amber Light with turn signals activated. Flexibility is very good, soft and easy to make any shapes and length to fit into your headlight retrofit
- EASY INSTALL: It can be installed without open the car headlight assembly. Comes preassembled with Weatherproof Double side tape to use inside or outside the Light assemblies, Bumper, Grill or On any other part of the Vehicle.
- BENDS AS YOU NEED : Can be bent, twisted, and contoured to fit most headlights. The LED Strip Tube Lights can paste outside of the headlights directly without disassembling the headlight, , It can be cut to any size and re-capped, after cutting, the tail must be insulated, otherwise it will be short-circuited
- Super easy to install: Simply splice into your current DRL and turn signal wiring. Wires Connect in following Order * Black Wire – Common Negative (-) *Red Wire – DRL (Daytime Running Light (+) * Yellow Wire – Turn Signal Light (+)
- 60cm in Length, and Cuttable every 3LED Beads (must seal the tube with Insulated Glue for Waterproof Protection). The led tube light can be used for car headlight, daytime running light, turn signal light, angel eye light, and so on Compatible for most of vehicles Including cars SUV vans Pickup trucks boats Buses RV’s atv with DC 12V power.100% REFUND within 30 DAYS and 12 MONTHS FREE REPLACEMENT, NOTE: Any problems, please send e-mail to us at first time!!!
- ACCENT DRL AND TURN SIGNAL COMBO LIGHT: A striking white liner with running Lights and Sequential Amber Light with turn signals activated. Flexibility is very good, soft and easy to make any shapes and length to fit into your headlight retrofit
- EASY INSTALL: It can be installed without open the car headlight assembly. Comes preassembled with Weatherproof Double side tape to use inside or outside the Light assemblies, Bumper, Grill or On any other part of the Vehicle.
- BENDS AS YOU NEED : Can be bent, twisted, and contoured to fit most headlights. The LED Strip Tube Lights can paste outside of the headlights directly without disassembling the headlight, , It can be cut to any size and re-capped, after cutting, the tail must be insulated, otherwise it will be short-circuited
- Super easy to install: Simply splice into your current DRL and turn signal wiring. Wires Connect in following Order * Black Wire – Common Negative (-) *Red Wire – DRL (Daytime Running Light (+) * Yellow Wire – Turn Signal Light (+)
- 60cm in Length, and Cuttable every 3LED Beads (must seal the tube with Insulated Glue for Waterproof Protection). The led tube light can be used for car headlight, daytime running light, turn signal light, angel eye light, and so on Compatible for most of vehicles Including cars SUV vans Pickup trucks boats Buses RV’s atv with DC 12V power.100% REFUND within 30 DAYS and 12 MONTHS FREE REPLACEMENT, NOTE: Any problems, please send e-mail to us at first time!!!