TAV2 30 - 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 3hp to 7hp. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket.
Specifications:
Large Pulley Driven unit: Dia. 157mm or 6"
Driver clutch bore: 3/4"
Top width: 19mm(3/4")
Sprocket teeth: 10 tooth for #40/41 chain and 12 tooth for #35 chain
Engagement range: 2350-200 RPM
Recommended engine: 2HP - 7HP engines, 3/4"shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4" Driver Pulley
1 x 5/8" Driven Pulley (6" Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
- 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
- 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
- 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware. Note This is not made by Comet
- 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
- 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
- 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware. Note This is not made by Comet
