Little World Bicycle Training Wheels, Variable Speed Bike Training Wheels Bicycle Stabilizers Mounted Kit for Kids Variable Bike of 18 20 22 Inch, 1 Pair (Sliver);

-Suitable for Children's bicycles of 18"/ 20"/ 22"

-It ensures your kids' safety and prevents accidental injuries when learning to ride.

-Fittings are supplied for easy installment.

 

Specification:

Material:Plastic + Metal

Color:Silver

Wheel diameter: Approx. 13cm / 5.1 inch

Bracket Size: Approx. 21 x 10.5cm / 8.3 x 4.1 inch

 

Package Included:

1 Pair Training Wheels (With Fittings)

 

Notes:

1.Please notice that don't make training wheels and rear wheel stand on the ground together, one of the training wheel should be 0.6-1cm higher above the ground.

2.The load of 88 lbs or less may be more suitable for the wheels.

3.Please look carefully to the pictures and make sure if these training wheels can be installed to your bikes.

4.Some bikes like those one-armed-frame bikes and bikes that rear frame tail hook angle are particularly large are not suitable for this training wheels.

5.The width of the frame tube is required within 2.6cm

 

 

Training Wheels Assembly Instructions

1.Insert bolt though wheel.

2.Then inset bolt though the wheel and crank.

3.Attach nut and tighten. You will require two wrenches to tighten this properly.

4.Remove rear axle nut from bicycle wheel axle.

5.Center the locking brace on rear wheel axle, then put the crank onto the locking brace.

6.Determine desired height of training wheels. When attached, the training wheels should have about 6-10 mm（1/4 to 1/8 in）clearance from the ground.

7.Keep your bicycle vertical with ground, make sure two training wheels vertical with ground too.

8.Tighten axle nut by adjustable wrench.