Product name: SAE single-head input wire (14AWG)
Specification: 2468 red and black PVC skin.
Material: new bare copper 2.03 square meters of new copper.
Voltage: 0-24V
Current: 20A
Length: 30CM
Diamet...

Buy Now From Amazon

Product name: SAE single-head input wire (14AWG)
Specification: 2468 red and black PVC skin.
Material: new bare copper 2.03 square meters of new copper.
Voltage: 0-24V
Current: 20A
Length: 30CM
Diameter: 3.5*2mm
Input interface: 4.5mm male and female head (black wire to negative electrode, red wire to positive electrode)
Output port: 5MM tin on peeling
Weight: 28g

Much better than having to find an allen wrench to open the battery door then try to clamp those alligator clips onto the battery.
These little ring terminal harnesses are super handy to have installed on your most charged devices.
These are a must-have for old carbureted motorcycles, sticking them on my modern bikes. It is worth having one of these on every battery in your garage.
There is no need to lift the seat but still trickle charge, as you can leave it attached and tucked it in under the seat.
Use to charge battery with an accessory connector (and a USB charger) to recharge your devices, or run an air pump.
Fast and easy to connect and disconnect, you can to install on your battery for quick connection to the battery maintainer.
This is the best way to keep a battery charged on a car, or used it to keep the battery fully charged on the emergency generator.

  • These are a must-have for old carbureted motorcycles, sticking them on my modern bikes. It is worth having one of these on every battery in your garage.
  • There is no need to lift the seat but still trickle charge, as you can leave it attached and tucked it in under the seat.
  • Use to charge battery with an accessory connector (and a USB charger) to recharge your devices, or run an air pump.
  • Fast and easy to connect and disconnect, you can to install on your battery for quick connection to the battery maintainer.
  • This is the best way to keep a battery charged on a car, or used it to keep the battery fully charged on the emergency generator.
  • These are a must-have for old carbureted motorcycles, sticking them on my modern bikes. It is worth having one of these on every battery in your garage.
  • There is no need to lift the seat but still trickle charge, as you can leave it attached and tucked it in under the seat.
  • Use to charge battery with an accessory connector (and a USB charger) to recharge your devices, or run an air pump.
  • Fast and easy to connect and disconnect, you can to install on your battery for quick connection to the battery maintainer.
  • This is the best way to keep a battery charged on a car, or used it to keep the battery fully charged on the emergency generator.

Similar Products

Electop SAE Power Socket Sidewall Port, Weatherproof SAE Quick Connect Solar Panel Mount Universal Flush-Mountable Connector, 12AWG SAE Cable with 8 Screws for Solar Generator Battery Charger (2 Pack)Sunway Solar SAE Polarity Reverse Adapter Connectors For Quick Disconnect Extension Cable, Solar Panel Battery Power Charger And Maintainer-3PackSAE Connector, Electop Solar Weatherproof SAE Socket Sidewall Port, SAE Cable Quick Connect Panel Mount Universal Flush-Mountable Connector for Solar Generator Battery Charger with 8 Screws(2 Pack)SUNER POWER Waterproof 10A Solar Charge Controller - Intelligent12V/24V Solar Panel Battery RegulatorTetra-Teknica MotoBasics Series RHS-01 12V Ring Terminal Harness with Black Fused 2-Pin Quick Disconnect Plug, 2 Feet, 16 Gauge Copper Wire, 10A Fuse, 2 Per PackKUNCAN 2FT SAE to O Ring Terminal Harness Wire 2 Pin Lug Cable, Eyelet Terminal Harness Extension Charge Cord, Quick Disconnect SAE Connection Lead For Motorcycle, Car, Tractor 10A Fuse