YANSHON 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, TD-8120MG, Control Angle 360°
ABOUT SERVO MOTOR:
The brushless servo steering gear has three wires: the red wire is connected to the positive electrode, the brown wire is connected to the negative electrode, and the orange wire is the signal wire
Products Specifcation:
Products Name:TD-8120MG Digital
1. Apply Environmental Conditon
1.1 Storage Temperature Range: -30°C～80°C
1.2 Operating Temperature Range:-25°C～70°C
2. Standard Test Environment
2.1 Temperature Range: -25°C～70°C
2.2 Humidity Range: 65%±10%
3. Mechanical Specification
3.1 Servo size: 40.0*20.5*40.5mm
3.2 Weight: 56g±5%
3.3 Gear type: 5 Metal
3.4 Limit angle: 360°
3.5 Bearing: 2BB
3.6 Horn gear spline: 25T Diameter:5.9mm
3.7 Horn type: Plastic, POM
3.8 Servo Case: Engineering plastics(PBT)+Aluminum alloy
3.9 Connector wire: 320mm±5mm
3.10 Motor: Carbon brush motor
3.11 Splash water resistance: No
4. Electrical Specification
4.1 Operat voltage 4.8V/7.2V
4.2 Idle current: mA/mA
4.3 No load speed: 0.18sec/60°/0.14sec/60°
4.4 Runnig current: 210mA/260mA
4.5 Peak stall torque: 20.5kg.cm/22.8kg.cm
4.6 Stall current: 2100mA±10%/2700mA±10%
4.7 Working voltage range: 4.8-7.2V
5.Control Specification
5.1Command signal: Pulse width modification
5.2Amplifier type: Digital controller
5.3Pulse width range: 500～2500usec
5.4Neutral position: 1500usec
5.5Running degree: 180°±3°(when 500～2500usec)
5.6Dead band width: 5 usec
5.7Rotating direction: Counterclockwise (when1000～2000usec)
- Digital Servo: Our TD-8120MG digital servo high torque full metal gear with 20kg high torque, using aluminium case for Robotic RC Car, Weight: 56g (1.97oz) only
- Digital Servo 360°High Rotation: The 360 degree steering gear is a continuously rotating steering gear; The steering gear with control angle 360 degree can rotate in the forward and reverse directions. Accurate movement can satisfy the needs of making robots
- Aluminium Case: Servo motor equipped with strong copper & aluminum gears,CNC aluminium middle shell. The virtual position is very small, the heat dissipation is fast, and the durability is higher, ensure that servo motor can work well
- Upgraded Version: High torque servo metal using high-precision and linearity potentiometer upgraded design, the main performance of the steering gear is sensitive, the stroke is large, the torque is large, and high precision
- Useful Accessories: 20kg high torque equipped with a red metal steering arm and 3 screws, the installation is more convenient and the operation is more stable. Perfect fit remote control robot, remote control car, remote control aircraft, robot contest
- Digital Servo: Our TD-8120MG digital servo high torque full metal gear with 20kg high torque, using aluminium case for Robotic RC Car, Weight: 56g (1.97oz) only
- Digital Servo 360°High Rotation: The 360 degree steering gear is a continuously rotating steering gear; The steering gear with control angle 360 degree can rotate in the forward and reverse directions. Accurate movement can satisfy the needs of making robots
- Aluminium Case: Servo motor equipped with strong copper & aluminum gears,CNC aluminium middle shell. The virtual position is very small, the heat dissipation is fast, and the durability is higher, ensure that servo motor can work well
- Upgraded Version: High torque servo metal using high-precision and linearity potentiometer upgraded design, the main performance of the steering gear is sensitive, the stroke is large, the torque is large, and high precision
- Useful Accessories: 20kg high torque equipped with a red metal steering arm and 3 screws, the installation is more convenient and the operation is more stable. Perfect fit remote control robot, remote control car, remote control aircraft, robot contest
