Marine Tech Tools Bleed Kit, Fits Seastar;

Simple yet effective bleed system for Seastar hydraulic steering systems.
Standard Seastar helm to bottle fitting - do not pierce bottle (PN:HA5430H)
Custom bridge tube connects bleed ports on steering cylinder.

Basic Instructions:
1 Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty)
2 Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings.
3 Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm.
4 Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed.
5 Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder.
6 Repeat 3-4 as nessasary until no air is visible in bridge tube.
7 Tighten bleed fittings before removing bridge tube.