Specifications:
1. Material: Iron
2. Fitment: Go Karts 30 Series
3. Replace Part Number: 219552A
4. Centrifugal Clutch: 3/4" Bore
5. Drive clutch bore:3/4 inches (19.05mm)
6. Key way:3/16"
7. Belt: Asymmetrical belt
6. Recommended engine:2HP-8HP
7. Fits engines with 3/4" shaft
Features:
1. This is a brand new aftermarket asymmetrical 30 series complete driver clutch with 3/4'' ID hole
2. Widely used on go karts, mini bikes, and lawn mowers
3. 30 Series Torque Converter Driver Clutch, 6" diameter with 3/4" Bore
4. Uses a 3/4" Asymetrical Belt (Not Included)
5. Professional Installation is Highly Recommended
IMPORTANT:
1. Torque converter drive pulley must be bolted tightly to the engine crankshaft. Recommended engine power 3hp to 8hp.
2. 2 1/2° angle (flat side) of belt must be against the 2 1/2° angle pulley flange(Next to engine).
3. Professional installation is highly recommended (No Instruction Included)
Note! The belt should be straight in the sheaves when torque converter(Driver-driven & Belt) mounted on parallel shafts-and the system in the low(Neutral or idle) position. When straight in the sheaves, the belt should also be square to the engine crankshaft and jackshaft.
How to install a go kart torque converter kit clutch 3/4"：
https://www.youtube.com/watch?v=khrDvS5drCA
The right and wrong way to install a torque converter on a Predator 212：
https://www.youtube.com/watch?v=2Gm7LigBYlQ
Package included:
1 x 3/4" Torque Converter Clutch
- This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
- Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
- Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
- This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
- This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
- Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
- Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
- This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
