🔔 Branger Heat Transfer Vinyl is a little thicker than other sellers. This is the optimum thickness after our test and can effectively prevent the heat transfer vinyl from being deformed during the peel.
Why Do You Choose Us?
- Professional Polyurethane Material
- Super size, rich color, high cost performance
- Very easy to cut and weed
- SGS certified products
- Washable
Craft Cutter Settings
Cricut:
Blade: Standard Setting: Iron-on setting
Silhouette CAMEO:
Blade- 8 Speed- 8 Thickness- 20 Blade Sharp - 45 degree Blade
* Different machines need different parameters, please follow the instructions.
Heat Press or Home Iron
Temperature: 320°F(160 °C), Time: 12-15 sec, Pressure: about 10 lbs
🔔 Note:
1. Make sure the temperature reaches to 320°F(160 °C) and the time is 12-15 sec.
2. The colder the weather, the longer you need to heat press; It's suggested to be 12 sec in summer and 15 sec in winter.
3. If you find it does not adhere well, please handle the heat press for twice or three times, 12-15 sec for once.
4. After the transfer, wait for 15 sec and peel it off after it cool down.
Warm Tips
1. Know the type of fabric to see if the fabric is suitable for application. And make sure the fabric can withstand iron on temperatures.
2. Before the transfer, preheat your base fabric for 3-5 seconds to remove wrinkles, dust and moisture. If you use home iron, please make sure no steam.
3. Please wait for at least 24 hours to wash your design; Always wash inside-out; Do not dry clean; Do not bleach.
