Longer LK5 Pro 3D Printer, DIY FDM 3D Printer with 4.3" Color Touch Screen, Fully Open Source, Silent Motherboard, Filament Run-Out Detection Function, Large Print Size 11.8x11.8x15.7 in;

Screen: 2.8 "touchscreen
Slicing software: LONGER
Connection: TF card

Printing:
Technology: LCD
Rated Power: 41W

Physical Parameter:
Printer Size: 170 (L) * 170 (W) * 360 (H) mm Print Volume: 3.86 "( L) x 2.17 "(W) x 5.5" (H) (98 x 55 x 140mm)
Printing material: fine resin, cast resin, dental resin, etc.
NW: 5.4kg
Total weight: 7kg

Precautions:
1. Avoid direct contact with the skin when handling the resin. Rinse thoroughly with water in case of accidental contact.
2.Remove the tank resin in the storage bottle if the printer is not used for more than 2 days.
3.Make sure there are no solid residues from the previous print when you start a new print.
4.Clean the bowl with cloth cloths when changing the resin.
5. Printed objects can be further cured under solar.

Package Content:
1 x Orange10 3D Printer
1 x Steel Scoop
1 x Ethernet Cable
1 x power adapter
2 x filtration funnel
2 x gloves
1 x tool
5 x card
1 x film output
1 x TF card