CIOKS DC7 Future Power Generation Power Supply
The CIOKS DC7 is an excellent and reliable power supply that works with standard low-current up to the most power-hungry effects pedals. Despite its slim one-inch profile, the DC7 provides a maximum of 48W from all its outlets. Thanks to its two-stage switch-mode power supply topology, DC7 achieves an ultra-low noise power. You can plug in high-current Eventide pedals without worrying about any unwanted hums.
The small-sized power supply features seven isolated DC outputs and an additional 5V USB outlet. You can connect the DC7 Power Supply with CIOKS 4, CIOKS 8, or other compatible units with 24V input voltage (via Flex Cables) if you want more isolated outlets.
TECHNICAL SPECS:
Pedalboard Compatible With: Temple Audio and PedaltrainUniversal Mains Input: 90~265V ACNumber of Switchable Outputs: 7Number of Selectable Voltages (per output): 4Power Current: 660mA at 9V DC Output, 1000mA at 5V USB Outlet, 2000mA at 24V DC OutputWeight: 1.1 lb
CONTENTS:CIOKS DC7 Future Power Generation Power SupplyMains power cord12 Flex Cables: 7 x Type 1 - black with 5.5/2.1mm center negative DC plug | Type 2 - red with 5.5/2.1mm center positive DC plug | Type 4 - green with 5.5/2.5mm center positive DC plug | Type 5 - black with 3.5mm tip positive Jack plug | Split Flex type 1 - powers two pedals of a single outlet | 3-Way Daisy Chain Flex Type 1 - powers three pedals of a single outletPedalboard Mounting Hardware: 2 screws, hex keyUser ManualDrill Template (Product Sheet)Flex Guide
- 2-stage switch-mode power supply topology
- Ultra-low noise achieved by multistage filtering
- 4 selectable voltages on each outlet
- Total maximum output power 48W
- 12 Flex cables included
- 2-stage switch-mode power supply topology
- Ultra-low noise achieved by multistage filtering
- 4 selectable voltages on each outlet
- Total maximum output power 48W
- 12 Flex cables included