BougeRV Solar Crimping Tools for 2.5/4.0/6.0mm² Solar Panel PV Cable + 6pcs Male Female Solar Panel Cable Connector + 1 Pair Solar Connector Assembly Tool Spanner Wrench Tool Kit

The VS-AU charge controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc. The features are listed below:
-Adopt high quality components of ST,IR and Infineon, make sure product using lifespan - 3-Stage intelligent PWM chargingï¼šBulk, Boost/Equalize, Float
- LCD display design, dynamically displaying device's operating data and working condition
- Multiple load control modes: Manual mode, Light control
- Battery temperature compensation function(NOTE: Unplug the RTS, the temperature of battery will be set to a fixed
value 25ÂºC.)
- Extensive Electronic protection
- Energy statistics function

Features:
12V / 24V DC Auto
Rated charge current: 60A
Max Input Power:12V @ 720W | 24V @ 1440W
Max. PV open circuit voltage: 50V (45V at 25â„ƒ temperature)
Battery type: Sealed(Default) / Gel / Flooded
3-Stage intelligent PWM charging: Bulk, Boost/Equalize and Float
Battery voltage range: 9V~32V C
USB output:5VDC/2.4A(Total) Terminals: 25mm2/4AWG
Net weight: 1.02kg

Wiring:
1. Please always connect the battery before connect the soalr panel, disconnect in reverse order. And pay much attention to the "+" and "-". 2. The battery fuse should be installed as close to battery as possible. The suggested distance is within 150mm.

Setting:
1.Accumulative power zero clearing: Under PV power interface, press SET button and hold on 5s then the value blink, press SET button again to clear the value.
2. Setting temperature unit: Under battery temperature interface, press SET button and hold on 5s to switch.

Package:
1* VS6024AU Solar charge controller
1* English manual

60 amp Solar Charge Controller: 12V/24V DC (Automatically detects systems voltage). Max.PV input voltage is 50V. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded
Positive Ground Charge Controller 60A: 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, Float; Multiple Load mode: Light control, Light Time control,Dual Time control
Solar Charge Regulator Built in LCD display design, dynamically displaying all operating datas and working condition; humanized button for more comfortable and convenient operation
Multiple protection against overcharge, over discharge, over load, short circuit, reverse polarity, over heat and battery under voltage;
Professional after-sales customer service, Heat sink design for achieving higher heat dissipation. Extensive electronic protection and battery temperature compensation function.
60 amp Solar Charge Controller: 12V/24V DC (Automatically detects systems voltage). Max.PV input voltage is 50V. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded
Positive Ground Charge Controller 60A: 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, Float; Multiple Load mode: Light control, Light Time control,Dual Time control
Solar Charge Regulator Built in LCD display design, dynamically displaying all operating datas and working condition; humanized button for more comfortable and convenient operation
Multiple protection against overcharge, over discharge, over load, short circuit, reverse polarity, over heat and battery under voltage;
Professional after-sales customer service, Heat sink design for achieving higher heat dissipation. Extensive electronic protection and battery temperature compensation function.

Top WaffleMaker Reviews

EPEVER 60A Solar Charge Controller 12V/24V, 60 amp Solar Regulator with Load Timer, Max 720W/12V, 1440W/24V Input, Dual USB 5V, fit for Lead-Acid Batteries;