LAVODA Leather Strop with Polishing Compound, Knife Stropping Kit for Sharpening & Honing Knives Tools;

What is Leather Strop?
Our Strops is a premium vegetable tanned hide with abrasive green compound that will put the sharpest edge possible on knives. It should be used as the final step in sharpening. You can use the it to maintain an edge by conducting a few swipes after each use of a blade.

What can I sharpen?
Woodworking Chisels
Straight Razors
Utility Knives
Hunting Knives
Folding Knives
Fillet Knives
Kitchen Knives
Chef's Knife

How does it work?
The tool works by realigning the very fine edge of the blade and polishing the blades surface. After use or sharpening the blade will have a slight burr this burr is what catches when you attempt to cut. If the blades edge is aligned the blade passes through with little effort. By stropping the knife the very fine edge of the blade will begin align, while the compound polished the edge.

How do I use it?

Step 1: Apply the compound by rubbing it on the side without the Logo, the smoother of the two sides. The simplest way to describe this process is like coloring with a crayon, back and forth with light pressure.
Step 2: Cover the entire leather surface with the compound.
Step 3: Place the blade on the leather. The cutting edge should be near the edge of the leather. Adjust the angle of the blade by raising the spine (The back of the blade where it isn't sharp) slightly creating a wedge with an angle of around 15 - 30 degrees.
Step 4: With light pressure push the blade up towards the top of the strop.

What is in the box?
1 x Paddle Strop
1 x Green Compound
1 x White Compound
1 x Stropping Guide
2 x Clean Sandpaper