HUINE 10A PWM Solar Charge Controller Waterproof IP68 12V 24V Solar Panel Controller Regulator for RV Caravan Boat Solar Panels System (24 Hours Working Mode);

❤ IF YOU NEED 20A WATERPROOF SOLAR CHARGE CONTROLLER WITH 24 HOURS WORKING MODE, PLS KINDLY SEE ASIN B07CK2PCC7

â–  Safety Instructions:
A) Make sure your battery has enough voltage for the waterproof solar charge controller to recognize the battery type before first installation,
only sufficient battery voltage can charge or activate the controller.
That means it won't charge or activate when hooked to a dead or low-voltage battery, or connecting only with solar panel but without battery
B) The battery cable should be as short as possible to minimize loss.
C) The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries.
D) The charge regulator is only suitable for regulating solar panels. Never connect another charging source to the charge regulator.

â–  How to connect solar system with the controller:
Step 1: Connect the battery to the solar charge controller firstly- plus and minus.(it will auto adapts to the battery voltage)
Step 2: Connect the load to the controller secondly.
Step 3: Connect the solar panel to the controller finally - plus and minus.
♥Note: The reverse order applies when deinstalling.

â–  Specification:
Color: Black
Rated Charging Current:10A
Rated Discharging Current:10A
Max Solar Input Voltage: ＜50V
System Voltage:12V/24V Auto Adapt
Self consume: ＜10mA
Operating Temperature: -20 ~ +60℃
Equalize Charging Voltage:14.4V/28.8V
Bulk Charging Voltage:14.2V/28.4V
Float Charging:13.8V/27.6V
Discharge Stop Voltage:11.2V/22.4V
Discharge Reconnect Voltage:12.6V/25.2V
Housing: Aluminum Alloy
Maximum Wire Size:16AWG
Size/Weight: 82x45x21mm/120g

● Package Include：
1 X 10A Waterproof Solar Charge Controller
1 X User Manual