Micro Skin Tag Remover Device Remove Skin Tags for Small to Medium Skin Tags;

How it works:
Put the rubber band onto the skin tag by using the DINHAND "L" and cone remover device. Once the band has been attached tightly to the root of the skin tag it will reduce its blood supply. It will turn dark brown to blackish color over time, then turn small, the band may drop off in the process, and finally fall off in a few days( usually 3-7 days, sometimes earlier or longer, just be patient).

Tip: If the skin tag is easily rubbed by clothe, or is easy to touch when sleeping, it is absolutely necessary to put a band-aid over it.

How to use:
Step 1. Use one swab to clean the tag area using, and push one band onto the top section of the cone
Step 2. Place the cone over the skin tag and slightly deep into the skin
Step 3. Place the "L" remover device onto the cone and push lightly until the band pops off the end
Step 4. Ensure the band attach tightly to the bottom of the skin tag

Extract some valuable experience shared by users:
1. After 2-3 trials, it will be smooth.
2. Be sure to roll the bands onto the applicator VERY cautiously. I'd recommend rolling the rubber band maybe 97% of the way down the plastic piece BEFORE you try to put it over your tag.
3. I ended up putting a little coconut oil on the cone to make the removal device slide easier.
4. If the band does not clasp the root of the tag tightly, you can add a band outside the first band to make it tighter.
5. HIGHLY recommend putting a Band-Aid over it
6. You can wash daily with foaming antibacterial soap or alcohol to prevent infection and use Neo-sporin for a day when it finally falls off.

Package Inlcuded:
1 x Micro cone
1 x Micro L device
10 x Micro bands

Note:
- It's suitable for skin tags with a widest side of 2mm-4mm.
- If the skin tag is smaller than 2mm, the band may not be able to grip the skin tag tightly