High Temp Tape, ELEGOO 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8'', 1/4'', 1/2'', 1'' with Silicone Adhesive for Masking, Soldering etc.

Input Voltagle:100-240V
Out Output Temperature:150C-480C
Case material:aluminum alloy
Case Size:130*88*38mm
Controller:STM32 V2.1S
HW:2.1S
SW:2.10
Defaut tip:T12-K+D24+BC2+ILS
Power supply:24V 5A
Tin melting time:8s

Package include:
Soldering station x1pcs
FX9501 handle x1pcs
T12-K x1pcs+T12-D24 x1pcs+T12-BC2 x1pcs+T12-ILS x1pcs x1pcs

1.NOTE:Iron tip does not work continuously with high temperature, high temperature work will easily damage the tip!
2.In this package,it is the FX9501 handle
3.Ordinary solder melting point is 183Â°C, lead-free solder melting point is 227Â°C, usually the welding temperature is 300-380Â°C, 380Â°C is the temperature of the dividing line, higher than 380Â°C, iron head oxidation and loss is extremely fast, seriously affect the heating core life.
5.STM32 OLED display T12 soldering station simple instructions: 1: the main function of welding station and performance characteristics: temperature range 150 ~ 480C 2:the thermocouple cold junction temperature automatic compensation range -9-99 C (to be more accurate). 3:PID temperature control, temperature stability Â± 10 C (no load). 4:can save 5 groups of temperature. 5:can save the temperature of each head calibration parameters, support all types of T12 head.
6. under normal circumstances, 1 second continuous counter-clockwise rotation below 3 cells into the standby (default 200 degrees (150-300 degrees can be configured) state, if the set temperature is below 200 degrees directly into sleep.

Output Temperature range is 150C-480C,Heats up to 300 celsius degree in 8 seconds,quick thermal recovery
If the ERROR is displayed, the handle or the tip is not installed properly. Please use a pair of pliers to push the tip into the innermost part of the handle. Then try rotating the tip to ensure that the tab of the tip is in good connect with the inner tab of the handle. If ERROR is still displayed and the light is always on when the tip or handle is installed, please contact us to get a solution. We encourage buyers to communicate with us to solve any problems.
Auto-sleep function,V2.1S is much stable than V2.0,aluminum alloy station case.
Package include:Soldering station+ 907 handle+T12-K+D24+ILS
There is no power plug in order,so you will not receive power plug.
Output Temperature range is 150C-480C,Heats up to 300 celsius degree in 8 seconds,quick thermal recovery
If the ERROR is displayed, the handle or the tip is not installed properly. Please use a pair of pliers to push the tip into the innermost part of the handle. Then try rotating the tip to ensure that the tab of the tip is in good connect with the inner tab of the handle. If ERROR is still displayed and the light is always on when the tip or handle is installed, please contact us to get a solution. We encourage buyers to communicate with us to solve any problems.
Auto-sleep function,V2.1S is much stable than V2.0,aluminum alloy station case.
Package include:Soldering station+ 907 handle+T12-K+D24+ILS
There is no power plug in order,so you will not receive power plug.

Top WaffleMaker Reviews

KSGER T12 Soldering Station STM32 V2.1S OLED T12 Iron Tips DIY Kits Temperature Controller Electronic Welding Iron Tips 907 Handle Case Power Equipments Sting;