D-type(10Pcs) Luxury Packing with Blue Case: 1#-M4,2#-M5,3#-M6, 4#-M8,5#-M10,6#-M12,7#-M14,8#-M16,9#-M18-20,10#-M22-24
How to use:
Insert the extractor into the tap slot of the same specification.
Rotate the lever handle counterclockwise (take the left tap and rotate clockwise) to remove the tap in the work.
Does not damage the finished silk surface, the operation is easier and effective.
Note: This kind of extractor is only suitable for the broken tap which is not too tight.
If the tap is too tight, it will break the claw easily.
The smaller the extractor, the easier to break, the lower the success rate
We only provide an additional solution to the broken tap, and do not guarantee a 100% success rate
Thank you for your kind understanding!
- Material：HSS 6542
- Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
- Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
- It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
- Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
- Material：HSS 6542
- Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
- Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
- It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
- Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
