Installation steps
Old bushing removal tip - see pics 5(1-5):
Use a screwdriver or chisel and hammer to bend the lip of the old bushing up. This will allow you to spray some WD40 or other penetrating oil into the bushing. Do this on all the other bushings and by the time you come back to the first it will be much easier to pound them out.
New bushing installation - see pics 5(6-7):
Use a hammer to GENTLY tap the new plastic inserts in. The residual oil will help but if you have excessive corrosion from the old inserts you may have to clean or scrape them out to avoid breaking these new inserts.
- Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 .
- Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic.
- Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges.
- Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well.
- Package include: 1 silver door bushing removal tool, 8 bushings and 4 Pins.Door Bushing Removal Tool did not fit TJ
- Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 .
- Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic.
- Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges.
- Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well.
- Package include: 1 silver door bushing removal tool, 8 bushings and 4 Pins.Door Bushing Removal Tool did not fit TJ
