The RC Electric Parts 80A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on!
The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC.
Benefits:
Programmable either using a programming card or transmitter
Super smooth and accurate linear throttle adjustment
Supports high RPM motors.
Utilizes smaller MOSFETs to minimize weight.
Minimal heat loss
Specs:
Continuous Output: 80A
Bursts Output: 100A for 15 seconds
UBEC: 5.5V/4A
Lipo Battery: 2 - 6s (cells)
NiCd/NiMH: 5 - 18 cells
Voltage Input: 6.4v - 25.5v
Size: 66mm x 35mm x 18mm
Weight: 90g
Motor Type: Brushless Motor
Max RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motor
ESC Manual Link
https://www.rcelectricparts.com/esc-user-guide.html
Programming Card Link
https://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp
