How to operate Zonpor fabric clothes steamer
1. Unscrew the nozzle head according to the directive on the machine, fill with cold water to the desired level, never surpass the maximum level. When finish, lock the head back on.
2. Turn ON/OFF switch to ON position. The switch light shows the steamer is on. The steamer will emit steam from the nozzle in 1 minute.
3. When the device runs out of the water, it will reset automatically to ensure your safety while leaving the indicator light on. If you wish to continue your steaming session, turn to OFF position, refill water by following step 1, then turn to ON position.
4. When finished, place the ON/OFF switch in the OFF position and remove the plug from the outlet.
Specification:
Dimensions: 8.7"x5.9"x3.4"
Weight: 1.3 pounds
Power: AC 120V, 50/60HZ, 800W
Water capacity: 6oz (180ml)
Heat-up time: 1 Minute
Run time: 10-12 Minutes
Package included:
* 1 Pcs Clothes Steamer
* 1 Pcs Travel BagÂ
* 1 Pcs Insulated Glove
* 1 Pcs User Manual
NOTE:
* If you find there are beads of water on the water tank, please don't worry. This is a normal phenomenon. We tested each product in case leakage.
* Never use the steamer on clothes that you are wearing on yourself, please use a hanger to hang your clothes while steaming.
* Never turn the device upside down, your steamer should never be over 45-degree angle especially when the device is ON
* Never fill water over MAX level to avoid spilling hot water while steaming
* Regularly Keep maintenance for your clothes steamer. Please use 1:1 vinegar water to clean the water tank when it becomes dirty.
