Description:
Onboard ATMega8 chip
With power and programming two lights
Onboard overcurrent
On the target board supports 5V and 3.3V power supply
Support Chip list:
51 Series:
AT89S51, AT89S52,, AT89S53, AT89S8252
AVR Series:
ATTiny12 (L), ATTiny13 (V), ATTiny15 (L), ATTiny24 (V), ATTiny25 (V), ATTiny26 (L), ATTiny2313 (V), ATTiny44 (V), ATTiny45 (V), ATTiny84 (V), ATTiny85 (V), AT90S2313 (L), AT90S2323 (L), AT90S2343 (L), AT90S1200 (L), AT90S8515 (L), AT90S8535 (L), ATMEGA48 (V), ATMEGA8 (L), ATMEGA88 (V), ATMEGA8515 (L), ATMEGA8535 (L), ATMEGA16 (L), ATMEGA162 (V), ATMEGA163 (L), ATMEGA164 (V), ATMEGA165 (V), ATMEGA168 (V), ATMEGA169 (V), ATMEGA169P (V), ATMEGA32 (L), ATMEGA324 (V), ATMEGA325 (V), ATMEGA3250 (V), ATMEGA329 (V), ATMEGA3290 (V), ATMEGA64 (L), ATMEGA640 (V), ATMEGA644 (V), ATMEGA645 (V), ATMEGA6450 (V), ATMEGA649 (V), ATMEGA6490 (V), ATMEGA128 (L), ATMEGA1280 (V), ATMEGA1281 (V), ATMEGA2560 (V), ATMEGA2561 (V), AT90CAN32, AT90CAN64, AT90CAN128, AT90PWM2 (B) , AT90PWM3 (B)
Packing Included:
1 X USBASP downloader
1 X 10P data cable
1 X 10P to 6P Adapter board
- This USBASP Programmer only supports WINDOWS system. It can be directly connected to the USB interface of the computer, which is very convenient to use. Driver installation is required to start the usb to isp.
- This USBASP Programmer is using onboard ATMega8 chip. With power and programming two lights, the target board suopports 5V and 3.3V power supply New self-adaptive automatic speed control, the asp is the new version, with pin on JP2.
- Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.
- Set PROGRAMMING programming interface, the user can upgrade the downloader firmware, programming is very convenient. This product can be used to update Ender 3 or Ender 3 Pro firmware
- The AVR USB ISP ASP Microcontroller documentation link cannot be displayed. If you need technical documentation, please click “Geekstory” to em-ail us.
- This USBASP Programmer only supports WINDOWS system. It can be directly connected to the USB interface of the computer, which is very convenient to use. Driver installation is required to start the usb to isp.
- This USBASP Programmer is using onboard ATMega8 chip. With power and programming two lights, the target board suopports 5V and 3.3V power supply New self-adaptive automatic speed control, the asp is the new version, with pin on JP2.
- Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.
- Set PROGRAMMING programming interface, the user can upgrade the downloader firmware, programming is very convenient. This product can be used to update Ender 3 or Ender 3 Pro firmware
- The AVR USB ISP ASP Microcontroller documentation link cannot be displayed. If you need technical documentation, please click “Geekstory” to em-ail us.
