What are Hub Centric Rings?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.
Why do I need it?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.
How can I confirm fitment?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 106.1mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 108mm. This should match your wheel's centerbore.
Compatibility Information:
These hubrings can fit Toyota and Lexus trucks SUVs with a 106.1mm Hub. Your Wheel Bore must be 108mm. Message us with year/make/model if you have any fitment questions.
Important Fitment Notes - Required Buyers Check These Before Purchasing
- Buyers must ensure their Vehicle's Hub is 106.1mm.
- Buyers must ensure their Wheel's Centerbore is 108mm.
- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.
Installation Advisory
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
- StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
- HUB RING INNER DIAMETER: 106.1mm (Your vehicle's hub lip diameter needs be this size)
- HUB RING OUTER DIAMETER: 108mm (Your wheel's center bore needs to be this size)
- Compatible with Toyota 1990-2021 4Runner, 1995-2021 Tacoma (Must be 6-Lug), 2007-2014 FJ Cruiser. Compatible with Toyota 1982-1997 Land Cruiser (Must be 6-lug), 2001-2007 Sequoia, 2000-2006 Tundra. Compatible with Lexus 2010-2021 GX460, 2003-2009 GX470.
- IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
- StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
- HUB RING INNER DIAMETER: 106.1mm (Your vehicle's hub lip diameter needs be this size)
- HUB RING OUTER DIAMETER: 108mm (Your wheel's center bore needs to be this size)
- Compatible with Toyota 1990-2021 4Runner, 1995-2021 Tacoma (Must be 6-Lug), 2007-2014 FJ Cruiser. Compatible with Toyota 1982-1997 Land Cruiser (Must be 6-lug), 2001-2007 Sequoia, 2000-2006 Tundra. Compatible with Lexus 2010-2021 GX460, 2003-2009 GX470.
- IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
