1 pack ATV-SCHS Winch Cable Hook Stopper Rubber Winch Line Saver with Allen Wrench for ATV UTV Winches (Orange);

Note:
Wear leather gloves.
1)Freespool winch and pull out approx. 2 feet of cable.
2)Pull Hairpin and release clevis pin from winch hook.
3)Remove the four bolts fastening the two halves of the Split Cable Hook Stopper together. Place the cable or rope between the two halves. Insert the four bolts and tighten.
4)Re-attach hook to cable end.
5)To stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead.
6) Position hook stopper at approx. 3/4 of the total line distance towards hook while using you winch.

Package Include: 
1x two-piece design roller
4x screws
1 x inner hexagon wrench