Parameter
Model: 5m/roll 5050 Red LED strip
Light source: SMD 5050
Emitting Color: Red
FPCB color: Black
LED quantity: 60 LEDs/m, 5m 300 LEDs in total
Protection Rate: IP65 Waterproof (Can't be used underwater)
Working Voltage: 12V DC
Max Working Current: 5A
Max Output power: 60W
Beam angle: 120 °
Working temperature: -20℃ to 60℃
Size: L500cm (5M) x W1.0cm x T0.25cm
Net weight: 210g
Life span: >50000 hours
Kindly note
1) The wattage of 5m LED strip is about 60W. If the strip blinks or flashes, maybe the power is not enough for the strip. So the power for 5m led strip must be 12V 5A 60W at least. 12V 5A 60W power supply ASIN: B01GEA8PQA
2) Please spread the strip from the tape before use. Otherwise, the strip will overheat in several minutes.
3) The LED strip is waterproof IP65, it can be used outdoor but not underwater.
4) The LED strip comes without power supply, controller and dimmer.
Application
Used for home, garden, hotels, clubs, shopping malls decoration
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in back-lighting, concealed lighting, channel lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting
Package included
1 x 5 meters LED strip light
(Power supply and controllers are not included)
- 【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.)
- 【Super Quality LED Strip】 300 pcs high-brightness 5050 Red LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful red light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children.
- 【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY.
- 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included.
- 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products.
- 𝐈𝐦𝐩𝐨𝐫𝐭𝐚𝐧𝐭: Please note that if used with vehicles such as cars, RVs, trucks, etc., please ensure that the power supply provides a stable voltage; if used for a long time at more than 12V, the circuit board will be damaged, resulting in abnormal conditions.
- 𝐖𝐡𝐚𝐭 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐩𝐨𝐰𝐞𝐫 𝐬𝐮𝐩𝐩𝐥𝐲 𝐬𝐡𝐨𝐮𝐥𝐝 𝐲𝐨𝐮 𝐜𝐡𝐨𝐨𝐬𝐞: It is recommended to use our 12V 5A 60W power supply(ASIN: B01GEA8PQA). Many power supply labels on the market are false and the power is not as high as claimed. If the power supply is overloaded, the DC connector will become hot.
- 【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.)
- 【Super Quality LED Strip】 300 pcs high-brightness 5050 Red LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful red light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children.
- 【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY.
- 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included.
- 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products.
- 𝐈𝐦𝐩𝐨𝐫𝐭𝐚𝐧𝐭: Please note that if used with vehicles such as cars, RVs, trucks, etc., please ensure that the power supply provides a stable voltage; if used for a long time at more than 12V, the circuit board will be damaged, resulting in abnormal conditions.
- 𝐖𝐡𝐚𝐭 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐩𝐨𝐰𝐞𝐫 𝐬𝐮𝐩𝐩𝐥𝐲 𝐬𝐡𝐨𝐮𝐥𝐝 𝐲𝐨𝐮 𝐜𝐡𝐨𝐨𝐬𝐞: It is recommended to use our 12V 5A 60W power supply(ASIN: B01GEA8PQA). Many power supply labels on the market are false and the power is not as high as claimed. If the power supply is overloaded, the DC connector will become hot.
