SUNGATOR is committed to bringing cost-effective products to customers, so that customers get more than they pay, high quality products to our own requirements, customer's satisfaction is our pursuit!
High quality: High strength, high hardness premium solid brass with thick wall, more durable than iron and iron galvanized pipe fittings.
Excellent performance: Precisely milled, threads are tighter and deeper, not easy to slip, smooth threads will reduce the resistance during installation, saving time and improving efficiency.
High temperature: Premium brass can withstand up to 100 °C (212 °F).
Tips: For better sealing, we suggest that all fittings must be used with teflon tape.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Contents: 2 pack of 1/4" NPT male pipe x 3/8" NPT female pipe.
- 【Don't be deceived by nominal size】NPT is only a nominal pipe size! For instance, the outer diameter at 1/4'' MNPT end is about 0.54'', not 0.25'' (This is uniformly specified in NPT pipeline standards). The 1/4'' NPT here is a nominal pipe size.
- 【Be aware of this before purchase】Make your selection according to the method shown in Main Figure 2 and 3. If you are not familiar with the NPT size, this may greatly help you choose the right size.
- 【NPT threads ≠ Compression threads】The connection of different thread type can lead to poor sealing or leakage.
- 【Safe to use】SUNGATOR 3/8'' female to 1/4'' male brass pipe fitting adapters meet specifications ASTM B584 and ASME/ANSI B16. These brass reducers are resistant to corrosion and scratches, can withstand temperature rated up to 212°F or pressure to 300 Psi.
- 【Versatile application】Brass pipe fittings for pipe extension to spigot, pipeline etc, and also these reducer adapters can be used with grease, fuels and natural gas, instrumentation and hydraulic systems in low and medium pressure pipe line connections.
- 【Don't be deceived by nominal size】NPT is only a nominal pipe size! For instance, the outer diameter at 1/4'' MNPT end is about 0.54'', not 0.25'' (This is uniformly specified in NPT pipeline standards). The 1/4'' NPT here is a nominal pipe size.
- 【Be aware of this before purchase】Make your selection according to the method shown in Main Figure 2 and 3. If you are not familiar with the NPT size, this may greatly help you choose the right size.
- 【NPT threads ≠ Compression threads】The connection of different thread type can lead to poor sealing or leakage.
- 【Safe to use】SUNGATOR 3/8'' female to 1/4'' male brass pipe fitting adapters meet specifications ASTM B584 and ASME/ANSI B16. These brass reducers are resistant to corrosion and scratches, can withstand temperature rated up to 212°F or pressure to 300 Psi.
- 【Versatile application】Brass pipe fittings for pipe extension to spigot, pipeline etc, and also these reducer adapters can be used with grease, fuels and natural gas, instrumentation and hydraulic systems in low and medium pressure pipe line connections.
