LCD Controller Board:
HDMI DVI VGA AUDIO LCD Board Work for LVDS Interface LCD Screen
Input Power Adapter: 12Vdc More than 3A.
Come In Standby Model When Not Input Signal
Standby Model <1W
Video Input: HDMI DVI VGA
Audio Input: HDMI
Audio Output: Speaker Connector
OSD: Brightness Contrast Auto Language And So On
Language: English French German Spanish Italian And So On
Board Size: 125mm x 58mm x 17mm
The Controller Board Fit To Arcade 1up DIY Kit
17" 1280x1024 M170ETN01.1 WYD170SKD-01
Packing list :
1× HDMI VGA DVI LCD Controller Board M.NT68676
1× Screw And Nut For GND Connection
1× Keyboard With Cable
- Perfectly work with monitor M170ETN01 1,M170QGBN30-01B,CD170A54-01 or WYD170SKD 01,A-E00171102-G. It can be used to mod the machines.You can upgrade the cabinet, and use this for the screen conversion. (Please make sure your LCD screen model is M170ETN01 1 or WYD170SKD 01.The model label is usually pasted to the back of the LCD screen. It may need to open the back cover to check the LCD screen model.)
- Compatible speaker for this controller board: Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board 68676.3 (new version) and Other Monitor Driver Board which Have PH2.0 Speaker Connector.
- Recommend Power Adapter Spec. 12Vdc More than 2A. Connector: 5.5mmx2.1mm. (Please note the voltage must be 12V DC. Other voltages may damage the controller board or fail to power on the controller board. The current is recommended to exceed 2A, if the current is too low, the LCD screen may cannot be lighted up.)
- Video Input: DVI VGA ,Audio Input: ,Audio Output: Speaker 4pin Connector. Board Size: 139mmx53mmx17mm (5.47in x 2.09in x 0.67in).
- Packing list : 1× VGA DVI LCD Controller Board 68676.3 (new version), 1× Screw And Nut For GND Connection, 1× Keyboard With Cable.There is no power adapter,speaker or board case in the packing list
- Perfectly work with monitor M170ETN01 1,M170QGBN30-01B,CD170A54-01 or WYD170SKD 01,A-E00171102-G. It can be used to mod the machines.You can upgrade the cabinet, and use this for the screen conversion. (Please make sure your LCD screen model is M170ETN01 1 or WYD170SKD 01.The model label is usually pasted to the back of the LCD screen. It may need to open the back cover to check the LCD screen model.)
- Compatible speaker for this controller board: Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board 68676.3 (new version) and Other Monitor Driver Board which Have PH2.0 Speaker Connector.
- Recommend Power Adapter Spec. 12Vdc More than 2A. Connector: 5.5mmx2.1mm. (Please note the voltage must be 12V DC. Other voltages may damage the controller board or fail to power on the controller board. The current is recommended to exceed 2A, if the current is too low, the LCD screen may cannot be lighted up.)
- Video Input: DVI VGA ,Audio Input: ,Audio Output: Speaker 4pin Connector. Board Size: 139mmx53mmx17mm (5.47in x 2.09in x 0.67in).
- Packing list : 1× VGA DVI LCD Controller Board 68676.3 (new version), 1× Screw And Nut For GND Connection, 1× Keyboard With Cable.There is no power adapter,speaker or board case in the packing list
