ElecGear NVMe USB 3.1 Enclosure, PCI-e M.2 SSD External Case, NV-i9 Aluminum Cooling Adapter, 2280, 2242 PCIe M2 Memory Card Reader, NVMe Hard Drive Converter Caddy Box, 10Gbps USB Type A and C Cable;

- NVMe PCIe Gen3 x 2 Lane to 10Gbps USB3.1 Gen2 Adaptor
- Two 10Gbps Cables included for Type-A and Type-C Hosts
- Premium Aluminum Casing Design with Excellent Cooling Effort
- Support NVMe PCIe M.2 SSD with M Key 2280, 2260, 2242, 2230
- Excellent Heat Dissipation with Thermal Silicon Pad Design
- Well compatible with multi-OS: Windows 7, 8, 10 and Mac OS
- Comply with Trim, UASP, Power Saving and upgradable Firmware
- Easy setup with free screwdriver, Hot-swappable, Plug & Play

Product: NV-i9
Main Chip: JMS583
Material: Aluminum
Port on Body: USB C 3.1 Gen2
Dimension: 102*40*9.9mm
Weight: 80g

Tested NVMe List:
Samsung V-NAND M.2 SSD: 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO, 960 970 Pro, WD Black, ADATA XPG, Corsair Force, Crucial, Intel Optane memory 600P, 760P, 900P, Toshiba OCZ RC100, Patriot, SK Hynix, Kingston, Mushkin Pilot, DREVO D1 XTREME Z370

Packaging:
1* ElecGear NV-i9
1* USB Type-C to Type-A Gen2 Cable (18-inch)
1* USB Type-C to Type-C Gen2 Cable (7.5-inch)
1* I-shaped gasket for M.2 in 2260, 2242, 2230 form factor
1* Thermal Pad
1* PH00 Screwdriver
(NVMe is NOT included!)

Compatibility Note:
1.Support PCIe NVME M-Key M.2 SSD ONLY! It does NOT fit SATA-based NGFF M.2 SSD
2.Not fit disks with AHCI logical interface. Some of disk offered both AHCI and NVMe edition, for example: Samsung SM951. MZ-VPV5120 / 2560 will be supported ONLY!
3.Make sure your PC came with USB3.1 Gen2 port and drives was properly installed. Some PC came with USB C port which does not mean that is USB3.1 Gen2
4.Some NVMe may need to take off its heatsink to adapt to this enclosure. For example: Plextor M8Pe, M9PeG and some of XPG
5.It's normal condition, the case will heat up since NVMe disk produce a lot of heat