FITMENT:
(1992-1996) Ford Bronco 4.9L, 5.0L, 5.8L w/ AT
(1992-2002) Ford E Series 4.2L, 4.9L, 5.0L, 5.8L
(1992-1998) Ford F Series 4.2L, 4.9L, 5.0L, 5.8L
(1990-1991) Ford LTD Crown Victoria, Mercury Grand Marquis 5.0L
(1994-2004 Ford Mustang 3.8L
(1992-1995) Ford Mustang 5.0L
(1990-1997) Ford Thunderbird 3.8L, 5.0L
(1990-1992) Lincoln Mark VII 5.0L
(1990) Lincoln Town Car 5.0L
(1989-1997) Mercury Cougar 3.8L, 5.0L
Also can be used on these older models:
1965-1968 Ford Mustangs 289 CID
(1982-1991) Ford Mustangs 5.0L (302 CID) w/ AT
(1968-1979) Ford Mustangs 5.0L (302 CID) w/ AT
(1969-1973) Ford Mustangs 5.8L (351 CID) w/ AT
SPECIFICATION:
1.4kW/12 Volt, CW, 10-Tooth Pinion
Ford PMGR
100% New
High-performance retrofit for 4 in., 4-1/2 in. starters
Planetary gears feature needle bearings (rather than bushings)
Solenoids feature late style S-terminal with threaded post andamp; include a spade terminal conversion kit
All component parts are OE interchangeable
Starter, drive andamp; solenoid are endurance tested
Notes - 3268N starter along with 79-2114 harness kit will retrofit older 4 in., 4-1/2 in. starters providing a 50% weight reduction and requiring less cranking amps,Because the PMGR starter is a smaller size, it provides better header clearance and reduces the effects of a hot start
Replaces - Ford 3C24-11000-AA, 3C2Z-11002-AA, 3C2Z-11002-AARM, E9SF-11000-AA, E9SF-11000-BA, E9SZ-11002-A, E9SZ-11002-B, E9SZ-11002-BRM, F7SU-11000-A1B, F7SU-11000-AA, F7SU-11000-AB, F7SZ-11002-AA
Package Including
1 pcs
- FIT FOR : Starter for 1992 1993 1994 for Ford Bronco 1990 1991 for Ford Country Squire 1992 1993 1994 for Ford E-150 Econoline 1992 1993 1994 for E-150 Econoline Club Wagon 1992 1993 1994 for E-250 Econoline 1992 1993 1994 for Ford E-350 Econoline 1992 1993 1994 for E-350 Econoline Club Wagon 1992 1993 1994 for Ford 1992 1993 1994 for F-250 1992 1993 1994 for F-350 1990 1991 for LTD Crown Victoria 1992 1993 1994 for Mustang 1989 1990 1991 1992 1993 1994 for Ford Thunderbird
- SPECIFICATION : 1.4kW/12 Volt, CW, 10-Tooth Pinion; Ford PMGR; 100% New; High-performance retrofit for 4 in., 4-1/2 in. starters
- FEATURES :Designed to withstand the harshest Situations/Provides balanced high speed torque for maximum performance and dependability/Armature/commutator remachined to the toughest concentricity standards in the industry/Increases brush life and maximizes starting power/Solenoids include 100% new high temp caps,copper windings and terminal hardware/Less battery draw results in faster starts with maximum voltage
- 100% INSPECTION : meets or exceeds OE manufacturers' torque,amperage draw and RPM standards.The 100% full - load inspection to ensures that buyers can use starters with the same quality as the OE manufacturer
- EASY INSTALLED: OE quality at an afforddable /Direct replacement/Installs the same as factory unit/Same dimensions as OE part/Same gauge material as OE/Installation requires no modifications
- FIT FOR : Starter for 1992 1993 1994 for Ford Bronco 1990 1991 for Ford Country Squire 1992 1993 1994 for Ford E-150 Econoline 1992 1993 1994 for E-150 Econoline Club Wagon 1992 1993 1994 for E-250 Econoline 1992 1993 1994 for Ford E-350 Econoline 1992 1993 1994 for E-350 Econoline Club Wagon 1992 1993 1994 for Ford 1992 1993 1994 for F-250 1992 1993 1994 for F-350 1990 1991 for LTD Crown Victoria 1992 1993 1994 for Mustang 1989 1990 1991 1992 1993 1994 for Ford Thunderbird
- SPECIFICATION : 1.4kW/12 Volt, CW, 10-Tooth Pinion; Ford PMGR; 100% New; High-performance retrofit for 4 in., 4-1/2 in. starters
- FEATURES :Designed to withstand the harshest Situations/Provides balanced high speed torque for maximum performance and dependability/Armature/commutator remachined to the toughest concentricity standards in the industry/Increases brush life and maximizes starting power/Solenoids include 100% new high temp caps,copper windings and terminal hardware/Less battery draw results in faster starts with maximum voltage
- 100% INSPECTION : meets or exceeds OE manufacturers' torque,amperage draw and RPM standards.The 100% full - load inspection to ensures that buyers can use starters with the same quality as the OE manufacturer
- EASY INSTALLED: OE quality at an afforddable /Direct replacement/Installs the same as factory unit/Same dimensions as OE part/Same gauge material as OE/Installation requires no modifications
