Triumilynn 12V Electric UTV Windshield Wiper Motor Kit Hard Coated Polycarbonate for Polaris Ranger RZR 900 1000 (Motor + Wiper);

Specification:
* Color: As Pictures Show
* Voltage: 12V
* Wiper Arm Length: 17.7"(450mm)
* Wiper Blade Length: 15.7"(400mm)
* Feature: Integrated ON/OFF switch on back of motor

Installation:
1. Install the wiper arm and wiper blade on the motor, then put the wiper assembly in front of the windshield by hand.
2. Turn on the power supply 12V to the motor, and the wiper motor starts to rotate, the angle of the wiper blade on both sides of the windshield is approximately the same, so that the position of the two mounting holes on the wiper motor can be determined, drill two holes on the iron frame below the windshield according to the position of the two mounting holes.
3. Remove the wiper arm and wiper blade, install the wiper motor on the iron frame with bolts, then install the wiper arm and wiper blade outside the windshield.
4. Connect the wiper motor power cable to the battery or to the headlight 12V power supply along the iron frame.

Notice:
1. You should measure the width and height of the windshield of your car
2. Tell us the installation position of the motor, so as to determine the length of the wiper arm and blade
3. Please check whether you use 12V DC power on your vehicle, so as to know whether the kit is suitable
If you still don't know how to choose, you can send an email to us.