NGK (4339) Standard Spark Plug, Pack of 1

For CAN AM OUTLANDER/ RENEGADE/ COMMANDER BELT REMOVAL TOOL.

A MUST HAVE FOR BELT/TRANSMISSION SERVICE.

Installation:

THIS BOLT WINDS CLOCKWISE INTO THE ONLY THREADED INSERT ON THE SECONDARY/DRIVEN CLUTCH TO SPREAD APART THE SHEAVES WHILE COMPRESSING THE SPRING FOR EASE OF BELT REMOVAL,

THEN JUST WIND OUT COUNTER CLOCKWISE AFTER BELT IS RE-INSTALLED AS YOU TURN THE SECONDARY/DRIVEN CLUTCH CLOCKWISE FOR INSTALLATION OF THE BELT.

BE SURE TO KEEP BELT IN THE CORRECT ROTATION DIRECTION ( IT WILL BE MARKED).

These 80mm bolts are the Longer length (Opens Clutch COMPLETELY but WILL ALLOW OVER THREAD in and Over Stress Clutch Springs).

Features: 12.9 CL , Pre oil , Fully threaded
Size: M8x1.25x80 Bolt
Used to open the secondary clutch for many Can-am ATV's & SXS's
Will not work with the factory X3 spreader they use a larger bolt.
These 80mm bolts are the Longer length (Opens Clutch COMPLETELY but WILL ALLOW OVER THREAD in and Over Stress Clutch Springs).
Features: 12.9 CL , Pre oil , Fully threaded
Size: M8x1.25x80 Bolt
Used to open the secondary clutch for many Can-am ATV's & SXS's
Will not work with the factory X3 spreader they use a larger bolt.
These 80mm bolts are the Longer length (Opens Clutch COMPLETELY but WILL ALLOW OVER THREAD in and Over Stress Clutch Springs).

Top WaffleMaker Reviews

Unlimited Rider 8mm Secondary Clutch Spreader Belt Change REMOVAL Puller Tool For BOMBARDIER BRP Can-am MAVERICK COMMANDER OUTLANDER RENEGADE ATV & SXS, 12.9CL Metric M8x1.25x80 Pre Oil Fully threaded;