HZXVOGEN Flowmeter Argon Co2 Gas Regulator Tig Mig Welding Pressure Reducer Flow Gauge;

IMPORTANT NOTE: IF YOU ORDER THIS ITEM SHIPPED FROM CHINA, YOU MAY RECEIVE IT IN 4-7 DAYS.


All indications showing this exclamation mark are important safety instructions.
1.Flowmeter complies with all current relevant technical regulations and meets all existing standards.
2.The flowmeter may under no circumstances be modified or tampered with without the written consent of the manufacturer.
3.Intermediary connections between the cylinder valve and the cylinder pressure regulator are strictly forbidden.
4.Incorrect use may endanger the operator and the other personnel, damage to the cylinder pressure regulator and the installation may also result.



Operating instructions

1.Keep hands and tool clean, oil and grease can cause an explosion on the contact with oxygen.
2.The operator should be fully familiar with these operating instructions prior to the use of this equipment; all instructions should be adhered to when in use.
3.Check that the flowmeter is suitable to the gas to be used.
4.Check that the cylinder value connection is clean and undamaged, if not, you must not connect cylinder pressure regulator.
5.Before connecting the cylinder pressure regulator, the cylinder valve should be swiftly opened and closed to dislodge water or foreign from the valve/regulator inlet seating. Do not stand in front of the cylinder valve and do not hold your hand before the cylinder valve.