Glow In The Dark Pigment, Wtrcsv 6 Color Luminous Powder Non-Toxic Safety Pigment Powder for Paint, Slime, Nails, Resin, Concerts or DIY - 20g/0.7oz Each(Total 4.2oz);

Using Condition(Recommended) :

With all Colorless, Clear Coating, Transparent Medium, Such As Ink Category, Transparent Nail Polish, Transparent Glue, Paint, Plastic Resin, Silicone Rubber, Ceramics, Glass etc.

FAQ:

1.Not glowing?？

Just received the neon powder and it has not been charged by light, so it will not glow.put the glow powder under the light for about 10 -30 minutes, then put it in the dark to see the glow effect.

2. Does the glow duration have something to do with charging time?

There is no difference between charge one day and charge one hour because fluorescent powder has absorption saturation.Once the light absorbed by the fluorescent powder is saturated, the light source you charge will automatically start to dissipate but we don't see it during the day. so you needs to re-charge 10-30 minutes before you want it to glow, the glow effect will be better.

3.Uneven brightness？

Don't shake the pigment when charging is complete,Once the glow pigment shakes, a part of powder paint that is not absorbed into the light source will cover the glow part that has absorbed the light,which will cause some glowing powder to glow while some luminous paint does not glow.

Notice:

1>: The more glow in the dark pigment powder or higher the percentage used, the brighter and longer the glow will last. Add Medium to powder, not powder to medium.

2>: Use a white or light color as a background for best results. If painting a black surface with powders, brilliance will be much less.

3>: The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.

4>: Try to prevent moisture in the manufacturing process. A yellowing of resin may indicate moisture.

5>: Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity.