VEHICLE APPLICATIONS:
2008-2016 Mitsubishi Lancer
2008-2013 Mitsubishi Outlander
REFERENCE OEM PART NUMBER: 7802A217 615-50180 7802A217 7802A017 700239
COMMON FAULTS AND ANALYSIS:
1.Blower fan does not move: The fan is used for a long time, and the dust is deposited too much, which causes the friction coefficient between the rotor and the bearing to increase, and the rotor is blocked or even stuck, causing the coil to be overheated and damaged.
2.The fan does not turn, but there is a loud buzz: This fault is most common on capacitor-activated blowers, mainly due to lack of capacity or severe leakage of capacitors, or damage to the startup group.
- FITMENT for THE FOLLOWING VEHICLE: The Heater Blower Motor fit for 2008-2016 for Mitsubishi Lancer /2008-2013 for Mitsubishi Outlander
- EFFECT OF HEATER BLOWER MOTOR: The blower consists of a speed-adjustable DC motor and a squirrel-cage fan that blows air through the heater core and heats it into the vehicle. By adjusting the speed of the motor, the amount of air supplied to the cabin can be adjusted.
- FEATURE: In the production of blower, the dimensions are strictly in for Accordance with the original factory standards. The high-quality components used are designed for plug-in type and the plug-in type is easy to install.
- REPLACEMENT for 0E: The original equipment is comparable to the motor and fan (wheel), saving installation time and cost; the fan (wheel) is pre-balanced with the motor to ensure assembly and performance. Premium materials and subassemblies provide maximum durability and strength.
- BUYER NOTICE: Please be sure to compare carefully with photos and check part number before buying items.Please contact us if you have any question regarding our this product.
- FITMENT for THE FOLLOWING VEHICLE: The Heater Blower Motor fit for 2008-2016 for Mitsubishi Lancer /2008-2013 for Mitsubishi Outlander
- EFFECT OF HEATER BLOWER MOTOR: The blower consists of a speed-adjustable DC motor and a squirrel-cage fan that blows air through the heater core and heats it into the vehicle. By adjusting the speed of the motor, the amount of air supplied to the cabin can be adjusted.
- FEATURE: In the production of blower, the dimensions are strictly in for Accordance with the original factory standards. The high-quality components used are designed for plug-in type and the plug-in type is easy to install.
- REPLACEMENT for 0E: The original equipment is comparable to the motor and fan (wheel), saving installation time and cost; the fan (wheel) is pre-balanced with the motor to ensure assembly and performance. Premium materials and subassemblies provide maximum durability and strength.
- BUYER NOTICE: Please be sure to compare carefully with photos and check part number before buying items.Please contact us if you have any question regarding our this product.
