BESITA Adjustable Magnetic Gauge Tool Camber Alignment Tool Strut Wheel Alignment Tool for Truck Car RV Tire Repair(1pcs);

This is An adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.

Specifications:
Measures the Camber and Caster angle on the wheel hub or brake disc Suitable for accurate checking of the castor and camber angle Has a simple leveling adjustment from -5 degrees to 5 degrees Magnetic gauge attaches to the hub or disc brake Allows adjustment to maintain correct wheel alignment and even tyre wear Time and money saving device Easy to read and convenient to operate.

Simple instruction on how to use the wheel alignment tool:
●1.Remove the wheel alignment sensor (Clip tool), remove the tire;
●2.The magnetic level gauge carefully on the side of the suction wheel disc brakes;
●3.The water level was adjusted to zero;
●4.Install the required location specific parts;
●5.Use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle;
●6.Retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)
●You could use this method for years and have your toe in & out checked digitally getting new tires. The mechanic on duty couldn't believe You achieved driver side 0.001 & 0.002 passenger side accuracy...by hand!