ANMBEST 2PCS MAX3232 3.3V to 5V DB9 Male RS232 Serial Prot to TTL Converter Module Root Connector for Arduino Raspberry Pi and Microcontrollers;
ANMBEST 2PCS MAX3232 3.3V to 5V DB9 Male RS232 Serial Prot to TTL Converter Module Root Connector for Arduino Raspberry Pi and Microcontrollers

This converter uses MAX3232-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial. It's a convenient and cost-effective solution to convert RS232 into TTL, so you can con...

Buy Now From Amazon

This converter uses MAX3232-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial. It's a convenient and cost-effective solution to convert RS232 into TTL, so you can connect equipment together based on your devices signal requirements.

Technical Specifications:
Type: DB9 male connector
Main chip: MAX3232
Operating voltage: 3.3V-5V
Interface: TX, RX, GND, VCC
Power supply: external
Operating current: 6mA
Suitable for use with most microcontrollers
Bauds: 300 to 115200
Size:

Package includes: 
2pcs RS232 DB9 Male Serial Port to TTL Module

  • Main chip: MAX3232; Operating voltage: 3.3V-5V; Interface: TX, RX, GND, VCC; Bauds: 300 to 115200.
  • Supports 3V to 5.5V power supply and provides bidirectional data communication at baud rates up to 115.2 Kbps.
  • This converter can be connected to an Arduino Serial pin (0,1) to convert standard Arduino TTL to RS232. It allows Arduino talk to hundreds of RS232 devices.
  • This converter uses MAX3232-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.
  • Application: RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.
  • Main chip: MAX3232; Operating voltage: 3.3V-5V; Interface: TX, RX, GND, VCC; Bauds: 300 to 115200.
  • Supports 3V to 5.5V power supply and provides bidirectional data communication at baud rates up to 115.2 Kbps.
  • This converter can be connected to an Arduino Serial pin (0,1) to convert standard Arduino TTL to RS232. It allows Arduino talk to hundreds of RS232 devices.
  • This converter uses MAX3232-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.
  • Application: RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.

Similar Products

5pcs MAX3232 Root Module Connector Chip RS232 to TTL Female Serial Port to TTL DB9 Converter Module Board fit Equipment Upgrades Like DVDNulSom Inc. Ultra Compact RS232 to TTL Converter with Male DB9 (3.3V to 5V)StarTech.com 10' RS232 Serial Null Modem Cable - Null Modem Cable - DB-9 (F) to DB-9 (F) - 10 ft - SCNM9FFElegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduinoAbleconn PI232DB9M Compact GPIO TX/RX to DB9M RS232 Serial Expansion Board for Raspberry PiDB9 null modem male to female slimline data transfer serial port adapter 2 PackHiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython (Pack of 3PCS)