Specifications:
Weight: 65g(2.32OZ)
Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
Speed: 0.16sec/60°(7.4V)
Stall Torque:25 kg·cm (347 oz·in) @6.6V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm in diameter)
The servo wire: 30cm(11.8inch) in length
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Wire Layout:
Red Wire: +
Black Wire: GND
White Wire: PWM/Signal
Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degrees
Package Contents:
1 x Digital servo
1 x Servo horn kit(as shown in the figure)
Tips:
1. Please use Li-Po battery to power the servo, Do Not use dry battery, otherwise the servo will move slowly or not at all(our servo has higher torque, so it also need more powerful power to drive itself).
2. Please use short and thick power cord, Do Not use Dupont cord
3. Our servo can be controlled by Arduino, please refer to the Arduino library.
If you have any questions, please feel free to contact us at [email protected], we will help you as soon as possible
- 【25kg-180°High Torque Servo Motor】This servo boasts a maximum torque of 25KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an anodized aluminum case that facilitates excellent heat dissipation and effectively reduces power consumption.
- 【Superior Quality & High Performance】This digital servo comes with metal gear and dual-ball bearings, which are well-made with exceptional performance, stability, and minimal noise output. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
- 【Perfect Servo for Model DIY & IP67 Waterproof】It fits robots, vehicle/boat/airplane models, and any DIY. Crafted with high precision and thorough sealing, this servo provides IP67 water resistance, which allows it to operate even in the presence of water splashes.
- 【Size & Weight】Size: 40*20*40.5mm (1.57*0.8*1.59inch); Weight: 68g (0.15 pound). 【Note】LD-25MG model has been renamed as HPS-2518MG as part of our brand's upgrade.
- 【Excellent After-sale Service】We value all customer's shopping experiences. If you come across any issues with our products, please don't hesitate to reach out to us, and we will try our best to help within 24 hours. Order today with peace of mind!
- 【25kg-180°High Torque Servo Motor】This servo boasts a maximum torque of 25KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an anodized aluminum case that facilitates excellent heat dissipation and effectively reduces power consumption.
- 【Superior Quality & High Performance】This digital servo comes with metal gear and dual-ball bearings, which are well-made with exceptional performance, stability, and minimal noise output. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
- 【Perfect Servo for Model DIY & IP67 Waterproof】It fits robots, vehicle/boat/airplane models, and any DIY. Crafted with high precision and thorough sealing, this servo provides IP67 water resistance, which allows it to operate even in the presence of water splashes.
- 【Size & Weight】Size: 40*20*40.5mm (1.57*0.8*1.59inch); Weight: 68g (0.15 pound). 【Note】LD-25MG model has been renamed as HPS-2518MG as part of our brand's upgrade.
- 【Excellent After-sale Service】We value all customer's shopping experiences. If you come across any issues with our products, please don't hesitate to reach out to us, and we will try our best to help within 24 hours. Order today with peace of mind!
