Very Important Notice:Ratings on the switch label are only for Purely Resistive AC load, for other types of loads please refer to the ratings above.DC load Current ratings are much lower than AC load,if you need to use this switch with more than 0.5A DC load,contact us for compatibility at first.
AC125V /AC 250V Current rerating for different loads
Inductive Load: 2.1A /3.5A
Lamp Load: 1.08A/1.8A
Motor Load: 1.2A/2A
Capactive Load: 1.08A/1.8A
Specifications:
Operating Temperature: 85 Degree
Color:Black
Weight : 75g
Material:ABS and metal
Type: 2Pins SPST ON/OFF
Voltage&Current : 10A/125V, 6A/250V
What You Get:
12 x Mini Round Rocker Boat Switches
Widely used for various kinds of electrical products, instrument, car, boat, household appliances such as lights, water dispenser, treadmill, coffee pot, speaker, electric car, motorcycle, TV, massage machine etc.Great buy and multifunctional toggle switch.
- Package: 6 Black Push Button Switch with Pre-Wired,Color: Black; Size: 21x15mm; Positions: 2 (ON / OFF); Terminal: 2Pin, soldered with 2 wires,Easy to install,Cost savings
- Pre-wired Design: The rocker switch is pre-wired with 65mm cable. The connector is covered by rubber and not easy to fall off,Cable length & diameter:10cm/2.94" & 20mm/0.08"
- Voltage & Current:AC 6A/250V 10A/125V Switching Life: 20000-40000 times,
- Snap-In Design: Snap in Design make the switch easy to install. Extruding the plastic part, then Push in to the Panel
- Material: plastic and metal,Every switch has passed the qualified test. If you have any quality problems, please contact us and we will provide you with satisfactory after-sales service.
- Package: 6 Black Push Button Switch with Pre-Wired,Color: Black; Size: 21x15mm; Positions: 2 (ON / OFF); Terminal: 2Pin, soldered with 2 wires,Easy to install,Cost savings
- Pre-wired Design: The rocker switch is pre-wired with 65mm cable. The connector is covered by rubber and not easy to fall off,Cable length & diameter:10cm/2.94" & 20mm/0.08"
- Voltage & Current:AC 6A/250V 10A/125V Switching Life: 20000-40000 times,
- Snap-In Design: Snap in Design make the switch easy to install. Extruding the plastic part, then Push in to the Panel
- Material: plastic and metal,Every switch has passed the qualified test. If you have any quality problems, please contact us and we will provide you with satisfactory after-sales service.
