NOTE: The input voltage (voltage to be measured) is restricted to 25V.
Description:
Voltage input range: DC0-25V
Voltage detection range: DC0.02445V-25V
Voltage Analog Resolution: 0.00489V
DC input connector: GND negative, VCC positive
Output interface: "+" 5V/3.3V, "-" GND, "S" Arduino AD pins
Package included:
5 X Voltage Sensor
- 🚩 This DC 0-25V voltage detection sensor module can work with Arduino analog single phase
- 🚩 The voltage detection module is based on a resistive divider principle design, it makes the interface terminal input voltage reduced 5 times, Arduino analog input voltage up to 5V, then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V.
- 🚩 If used 3.3V system, the input voltage can not exceed 3.3Vx5 = 16.5V
- 🚩 Voltage detection range: DC0.02445V-25V
- 🚩 There are 5PCS DC 0-25V voltage detection sensor module in the package.
- 🚩 This DC 0-25V voltage detection sensor module can work with Arduino analog single phase
- 🚩 The voltage detection module is based on a resistive divider principle design, it makes the interface terminal input voltage reduced 5 times, Arduino analog input voltage up to 5V, then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V.
- 🚩 If used 3.3V system, the input voltage can not exceed 3.3Vx5 = 16.5V
- 🚩 Voltage detection range: DC0.02445V-25V
- 🚩 There are 5PCS DC 0-25V voltage detection sensor module in the package.
