The Metabo HPT NV65AH2 Coil Siding nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" X .099" At a rate of 3 per second, The NV65AH2 is both powerful and efficient. Wit...

Buy Now From Amazon

The Metabo HPT NV65AH2 Coil Siding nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" X .099" At a rate of 3 per second, The NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional Siding nailer gets even better. Additional features such as the adjustable Air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
  • FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
  • NO MAR NOSE CAP: Protects material from accidental marks
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
  • AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction
  • LIGHTWEIGHT: Only 4.8lbs for easy maneuverability
  • ADDED SAFETY: Plastic shield deflects wire collation
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4"
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
  • FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility
  • NO MAR NOSE CAP: Protects material from accidental marks
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications
  • AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction
  • LIGHTWEIGHT: Only 4.8lbs for easy maneuverability
  • ADDED SAFETY: Plastic shield deflects wire collation
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

Similar Products

PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set)PacTool International SA90338 Gecko Gauge, LP Siding Installation Tool (1 Set)Toolhangers Unlimited Hitachi Nail Gun Hanger (Yellow 81006)Metabo HPT NT65M2S Pneumatic Finish Nailer, 16 Gauge, 1-Inch up to 2-1/2-Inch Finish Nails, Integrated Air Duster, Selective Actuation Switch, 360-Degree Exhaust Portal, 5-Year WarrantyFreud D0704DH Diablo 7-1/4-Inch-by-4-Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade with 5/8-Inch ArborHitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air DusterMetabo HPT NV45AB2 Roofing Nailer, 7/8-Inch up to 1-3/4-Inch Coil Nails, 16 Degree, Side Load, Nail Capacity - 120, Lightweight and Well-Balanced, 5 Year WarrantyMetabo HPT 13369HPT 2-1/2-Inch x 0.092-Inch Collated Wire Coil Siding Nails, Full Round-Head, Ring Shank, Hot-Dipped Galvanized, 3600-Pack