PG pump instructions: High performance energy-efficient pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
For use in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles for less maintenance. Multiple size insert fitting and suction cups included. Designed for fresh water use only.
Pump Maintenance:
This pump design features a water lubricated ceramic bearing and shaft for long lasting service. However, the rotor assembly is susceptible to failure if sand or extra fine grit is being pumped.
-CAUTION: Always disconnect the pump when performing any maintenance or handling.
-Check the circuit breaker and try another(GFCI) outlet to ensure the pump is getting electrical power.
-Check the pump discharge, impeller and tubing for obstructions.
-Check the inlet screen to ensure it is not clogged.
-After removing the volute, rotate the impeller by hand to insure that it can spin freely.
- Specs & Dimensions: 4.33*3.5*4.1 inches; Max flow rate: 800 GPH (3000L/H); Max lift height: up to 10 ft.; Wattage: 24W; Voltage: 110-120V
- Adjustable Flow Rate: Water flow can be adjusted via the control knob and change different nozzles to meet the water pressure you want; As the lift height increases, the flow rate decreases
- Detachable & Cleanable: This powerful yet small-sized water pump is easy to hide and disguise; No tools are necessary for disassembly and it’s very easy to clean
- Many Possible Placement Positions: Place the pump flat on its base, stick it on an angled or vertical surface, and manually rotate it into any position you need
- Wide Range of Applications: This is a high-performance, energy-efficient pump and is well-designed for use in fish tanks, fountains, hydroponic systems, irrigation systems, etc
- Specs & Dimensions: 4.33*3.5*4.1 inches; Max flow rate: 800 GPH (3000L/H); Max lift height: up to 10 ft.; Wattage: 24W; Voltage: 110-120V
- Adjustable Flow Rate: Water flow can be adjusted via the control knob and change different nozzles to meet the water pressure you want; As the lift height increases, the flow rate decreases
- Detachable & Cleanable: This powerful yet small-sized water pump is easy to hide and disguise; No tools are necessary for disassembly and it’s very easy to clean
- Many Possible Placement Positions: Place the pump flat on its base, stick it on an angled or vertical surface, and manually rotate it into any position you need
- Wide Range of Applications: This is a high-performance, energy-efficient pump and is well-designed for use in fish tanks, fountains, hydroponic systems, irrigation systems, etc
