1. Bluetooth receiver 5.0 product main parameters
Bluetooth chip: CSR8675
Bluetooth protocol support: RX:A2DP AVRCP TX:A2DP
Transmission distance:>80M (straight line without occlusion)
Battery standard: 1000MA
Working time: RX>20H TX average>15H
Charging time: about 4.5H
Charging voltage: DC 5V
The working frequency range is: 2.402-2.480Ghz
Input / output connection: SPDIF, 3.5MM stereo audio interface
Product support TX: apt-X HD, apt-X LL, apt-X, SBCRX: apt-X HD, apt-X LL, apt-X, SBC
Packing list:
Instruction manual;
3.5MM audio cable;
Micro USB power cable;
Optical fiber lineï¼›
RCA one out two audio cable;
3. Product packaging size: 14*9.5*5.3(cm)
Weight: 252.2g
With battery, battery specific information:
Battery size: 5.2*3.4*0.5cm
Battery type: polymer lithium battery
Number of batteries: 1
Battery weight: 18.8g
Number of battery units: 1
Battery watt hour: 3.7Wh
Lithium content: 51.18%
Use scene: Smartphone / TV / Speaker / Computer
Product warranty period is: 12 months
8. Main uses of the product:
The product feature is to give Bluetooth functionality to those electronic products that don't have Bluetooth capabilities, via RAV cable links, or links to 3.5mm audio cables.
Moreover, the Bluetooth receiver 5.0 can connect two Bluetooth devices at the same time.
In the family life, the parents can watch the programs played on the electronic devices such as television or computers without disturbing the children's rest.
- [80m long distance receiving and dual antenna] Bluetooth transmitting receiver adopts 5.0 Bluetooth technology and dual antenna design, the signal is stable, and the transmission distance is about 80m. The device is connected to the TV, and even if you go outdoors, you can hear the sound of the TV through the Bluetooth headset. *Note: The operating range may be affected by Wi-Fi routers, wireless TV adapters, etc., as well as the receiving device.
- [The only new technology, straight-through function] If the audio cable can't be directly plugged into the computer, this product can be switched to the speaker device with the direct wiring of the TV in the Bypass mode. At this time, our product is equivalent to the function of the patch cord, connecting the TV and the speaker. This design allows you to freely convert between Bypass mode and Bluetooth mode, requiring only one switch without disconnecting any cables.
- [Product equipped] This product will be equipped with 3.5MM audio cable, Micro USB power cable, fiber cable, RCA one audio cable. There is also a very detailed instruction manual. These equipments will help you to use the modified product more conveniently.
- [Transmission and Receive ] This product is in the launch mode. When the child or the elderly are sleeping, you can hear the sound of the TV through the headphones, and can watch TV without disturbing the sleeping person. In the receiving mode, this product can transfer the music on the mobile phone, computer and PAD to the audio equipment with AUX/SPDIF audio input interface through the Bluetooth receiving function of the product. You can control the music up and down, pause, and volume.
- [Long standby time]: The built-in battery is 1000mAh, and the standby time is very long. The charging time is 4.5 hours, RX is greater than 20H, and TX is about 15H on average. When the power is lower than 20%, there will be a low battery reminder. After 6 minutes of no connection in the RX and TX modes, the product automatically enters the sleep power saving mode, and comes with a battery protection IC, which is safe and reliable.
- [80m long distance receiving and dual antenna] Bluetooth transmitting receiver adopts 5.0 Bluetooth technology and dual antenna design, the signal is stable, and the transmission distance is about 80m. The device is connected to the TV, and even if you go outdoors, you can hear the sound of the TV through the Bluetooth headset. *Note: The operating range may be affected by Wi-Fi routers, wireless TV adapters, etc., as well as the receiving device.
- [The only new technology, straight-through function] If the audio cable can't be directly plugged into the computer, this product can be switched to the speaker device with the direct wiring of the TV in the Bypass mode. At this time, our product is equivalent to the function of the patch cord, connecting the TV and the speaker. This design allows you to freely convert between Bypass mode and Bluetooth mode, requiring only one switch without disconnecting any cables.
- [Product equipped] This product will be equipped with 3.5MM audio cable, Micro USB power cable, fiber cable, RCA one audio cable. There is also a very detailed instruction manual. These equipments will help you to use the modified product more conveniently.
- [Transmission and Receive ] This product is in the launch mode. When the child or the elderly are sleeping, you can hear the sound of the TV through the headphones, and can watch TV without disturbing the sleeping person. In the receiving mode, this product can transfer the music on the mobile phone, computer and PAD to the audio equipment with AUX/SPDIF audio input interface through the Bluetooth receiving function of the product. You can control the music up and down, pause, and volume.
- [Long standby time]: The built-in battery is 1000mAh, and the standby time is very long. The charging time is 4.5 hours, RX is greater than 20H, and TX is about 15H on average. When the power is lower than 20%, there will be a low battery reminder. After 6 minutes of no connection in the RX and TX modes, the product automatically enters the sleep power saving mode, and comes with a battery protection IC, which is safe and reliable.
