A fast-drying traffic paint for marking traffic lanes on streets, highways, parking lots, warehouses and other areas where white parking lot paint, marking paint, line paint, striping paint, road paint, or traffic paint is required. Traffic beads may be dropped into this coating while wet to provide light reflecting markings. If beads are applied, they should be broadcast into the wet paint at a rate of 6 pounds of beads per gallon of paint. For use on concrete and asphalt on interior or exterior horizontal surfaces such as streets, highways, parking lot or warehouses.
- Fast-drying, interior/exterior acrylic latex line marking traffic paint that can be applied with a brush, roller, hand or automatic line markers.
- Traffic marking paint dries to touch in 30 minutes.
- Traffic beads can be dropped into the coating while wet to provide light reflective marking.
- Line marking paint for traffic lanes, highways, parking lots, warehouses.
- Coverage for a 4-inch line = 680 - 960 feet long.
- Apply when air or surface temperatures are above 50 °F (10 °C).
- Before painting, review the INSL-X Traffic Paint label for proper preparation and application tips.
- Fast-drying, interior/exterior acrylic latex line marking traffic paint that can be applied with a brush, roller, hand or automatic line markers.
- Traffic marking paint dries to touch in 30 minutes.
- Traffic beads can be dropped into the coating while wet to provide light reflective marking.
- Line marking paint for traffic lanes, highways, parking lots, warehouses.
- Coverage for a 4-inch line = 680 - 960 feet long.
- Apply when air or surface temperatures are above 50 °F (10 °C).
- Before painting, review the INSL-X Traffic Paint label for proper preparation and application tips.
