Specification:
Power source: Lion battery and solar pane
Power: 3.2v 600 mAh
Sensor mode: Motion sensor & Light sensor
Sensor angle: 90-120 degrees
Sensitivity distance: 5-6 m
LED: 7 LED
IR Rating: IP 65
Working temperature: -5-60°c
Housing material: ABS+PC
Solar charging time: 8-12 h
Package List:
1* Solar Feeder Light
1* English manual
ADDITIONAL NOTE:
1. the light should be charged for 5 hours under the sunlight before using.
2.If there is no good sunlight in 3 months, the battery may be out of power, you have to charge with the bright sunlight. When it is fully charged, it can function normally.
3.If the light blinks, it shows that the power is low. Thus you have to charge with the bright sunlight at once.
4.If there is no strong sunlight during winter, especially in northern areas, it may take longer time to charge the device and this is normal for the solar items.
- 【360°Rotation & Dual Lights】This feeder light has dual light head, up to 14 LEDs, It can rotate all around for maxium efficiency
- 【Adopts eco-friendly Solar Panel 】the deer feeder light built-in 600mAh Li-ion battery, it is charged by converting solar energy into electricity during day time, solar charging time is 8-12Hrs; For op
- 【Maxium Detection Range】the safety LED sensor light should be mounted 1.8 to 2.5m(6 to 8ft) above the area to be scanned; When decided where to mount the light, keep in mind that the motion sensor that activates this lights has a field of vision of 120° (horizontal) at a maximum distance of 7m/23ft
- 【Multi-Level Protection】 Meets IP65 waterproof level, protect your solar power feeder lights from rain, moisture, sand, dust, corrosion, etc
- 【Application occasion】This solar motion light is ideal for area where electricity is not available, including driverways, carports, garages and entrance doors, for added safety and security around your home.
- 【360°Rotation & Dual Lights】This feeder light has dual light head, up to 14 LEDs, It can rotate all around for maxium efficiency
- 【Adopts eco-friendly Solar Panel 】the deer feeder light built-in 600mAh Li-ion battery, it is charged by converting solar energy into electricity during day time, solar charging time is 8-12Hrs; For op
- 【Maxium Detection Range】the safety LED sensor light should be mounted 1.8 to 2.5m(6 to 8ft) above the area to be scanned; When decided where to mount the light, keep in mind that the motion sensor that activates this lights has a field of vision of 120° (horizontal) at a maximum distance of 7m/23ft
- 【Multi-Level Protection】 Meets IP65 waterproof level, protect your solar power feeder lights from rain, moisture, sand, dust, corrosion, etc
- 【Application occasion】This solar motion light is ideal for area where electricity is not available, including driverways, carports, garages and entrance doors, for added safety and security around your home.
