Specifications:
- Microcontroller: Atmel ATmega328
- Architecture: AVR
- Operating voltage: 5V
- Input voltage: 7-12V
- Flash memory: 32 KB of which 2 KB used by bootloader

Buy Now From Amazon

Specifications:
- Microcontroller: Atmel ATmega328
- Architecture: AVR
- Operating voltage: 5V
- Input voltage: 7-12V
- Flash memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock frequency: 16 MHz
- Analog I / O pins: 8
- EEPROM: 1 KB
- DC current per I / O pins: 40 mA (I / O pins)
- Digital I / O pins: 22
- PWM output: 6
- Power consumption: 19 mA
- Dimensions: 0.70 "x 1.70''

Input and Output
- Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions.
- Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.

Package Including:
3 X Nano Board (soldered)
3 X USB Cable


  • The header pins has been soldered for this package and it comes with 3pcs USB Cables.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the for Arduino software (IDE). It has everything that for Arduino/for Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
  • The header pins has been soldered for this package and it comes with 3pcs USB Cables.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the for Arduino software (IDE). It has everything that for Arduino/for Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.

Similar Products

Emakefun Nano Terminal Expansion Adapter Board for Arduino Nano V3.0 AVR ATMEGA328P with NRF2401+ Expansion Interface, DC Power Supply Interface (5PCS)Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduinoMakerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module NewELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PILAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board for Arduino (Nano x 3 with USB Cable)Emakefun Nano Terminal Expansion Adapter Board for Arduino Nano V3.0 AVR ATMEGA328P with NRF2401+ Expansion Interface, DC Power Supply Interface (2PCS)