Product Description:
Name: Digital Temperature Control Monitoring Instrument
Operating Voltage: DC 6.0-30V
Temperature Control Range: -50 to 110 Celsiu
Control Accuracy: 0.1 Celsius
Refresh Rate: 0.5s
T-Sensor Type: 10K0.5%NTC
Compatible Load: DC 6.0-30V or AC 220V 10A
Protection Function: Support one key emergency stop and power lost memory
Restore Factory Defaults:
Press the STOP and SET buttons above 3S at the same time to restore the factory setting.
High temperature alarm (ALA) function:
The actual temperature is greater than the alarm temperature, open the sound-light alarm, disconnect the relay, and press any key to stop the alarm.
Delayed start (OPH) function:
After completing a normal heating/cooling operation, start timing T, and carry out the next round of heating/cooling when T is greater than OPH.
Temperature correction (OFE) function:
Calibration value range - 10 to 10 Celsius, the actual temperature = measuring temperature + calibration value
Programming setting:
Working mode/temperature setting/return difference temperature
1. Short press SET key to enter the quick setting interface;
2. Switch to set the parameter value by short press SET, UP/DOWN to modify.
Alarm temperature/delay start/temperature correction:
1. Long press SET key for 3s to enter the parameter setting interface;
2. Switch to set the parameter value by short press SET, UP/DOWN to modify, STOP to open or close.
Long press SET key 3S above or 6S, no operation to exit setting and save parameters.
Tips:
UP/DOWN supports short press or long press to rapidly increase or decrease;
UART serial port control (single-chip TTL level communication) order details can be found in the product photo.
Package Include:
1pc DC 6.0-30V LCD Digital Temperature Controller
Product Description:
Name: Digital Temperature Control Monitoring Instrument
Operating Voltage: DC 6.0-30V
Temperature Control Range: -50 to 110 Celsiu
Control Accuracy: 0.1 Celsius
Refresh Rate: 0.5s
...
Similar Products
