Mudder quartz clock movement with hands to fit dials up to 40 cm/ 15.7 inches in diameter
DIY supply:
This item is suitable for repairing, replacing the broken parts of a clock or making a clock by yourself.
Application range:
The jump second movement are suitable for different thickness clock panel, and fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock
Note:
Please do not install the minute hand and hour hand with too much pressure or they will be bent.
Specification:
Color: black
Material: plastic and aluminum
Power: 1.5 V AA battery (not included)
Dimensions:
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 172 mm (6.8 inches)
Total minute hand length: approx. 207 mm (8.1 inches)
Second caps: approx. 7 mm (0.3 inch)
Package included:
1 x Quartz clock movement
1 x Second caps
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
- Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch)
- Size: total shaft length is 31 mm (1-1/ 5 inch), thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inches) thickness clock panel
- Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
- Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch)
- Size: total shaft length is 31 mm (1-1/ 5 inch), thread length is 24.6 mm (24/ 25 inch); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inches) thickness clock panel
- Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc.
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
