Compatible with iPhone 6 Plus Screen Replacement 5.5 inch (White), COASD LCD Digitizer Touch Screen Assembly Set with 3D Touch, Repair Tools and Professional Replacement Manual Includ (6 Plus White);

COASD iPhone 6 Plus 5.5 Inch (Black)

Installation: 
1. Please make sure you are a special repair technician, otherwise you will break the product. 
2. Please test it by inserting the flex to your motherboard before installation, be sure you feel a gentle snap. If not, then try again, or the cable will not be connected properly and will not work functionality.

If you meet some problems like can't turn on, touch insensitive, flash, lines on screen etc, please follow below steps: 
1. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector. 
2. Disconnect and reconnect the flex cables from the motherboard side. 
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 
4. Make sure IOS has been upgraded to the latest version. 
5. Please leave phone alone overnight and see if this problem persists in the morning. Sometimes there is static after installing that will go away after some time.

Package Include: 
1* iPhone 8 Plus Black 5.5 Inch LCD replacement assembly kit
1* Set Repair Tool Kits,

Warning: No protection & Inappropriate installation may cause injury. Please follow installation guide step by step.
1.Check the package before open it. If found break, Please contact Amazon or Seller for exchange.
2.Please switch off phone to avoid any electrical injury before installation.
3.Not charge phone to avoid any electrical injury during replacement.