Features
AUTOTOOLHOME Center Gauge and Doweling Jig easily and accurately find the center of a board's edge every time; no measuring and no tedious trial and error adjustments required.This makes it the perfect tool for both mortise and tenon layout and drilling dead-on aligned dowel joint holes.
This layout tool takes all the guesswork out of precisely marking-out mortise and tenon joints that are centered exactly on your stock. Based on the never-fail reliability of a parallelogram, the Center Gauge features two, precision-machined parallel arms that quickly adjust to the stock thickness, placing the center bar dead center on the material. Just use a pencil, marking knife or scribe tool to mark out the center bar location on your stock- and you're done!
To switch to doweling mode, remove the marking bar and attach the doweling jig bar. To use, simply align the precision-machined notches on the jig's doweling bar with the dowel location mark on your board, hold the jig and drill. Slide the jig to the next location, align and drill. No need to clamp the jig or tighten knobs.
Specifications
Material: Aluminum alloy6061(drill guide） and steel (bushing)
Surface treatment: Anodic oxidation treatment
Material of drill bushing: Steel HRC50°
Bushing Size: 6mm, 8mm, 10mm (3pcs each size,millimeter )
Locating Dowel Pin: 6mm, 8mm, 10mm
Drill Guide Size: 23.5 × 15 × 6cm/9.2 × 5.9 × 2.3"
Package include
1 x Self Centering Doweling Jig
1 X 6mm dowel Pin
1 X 8mm dowel Pin
1 X 10mm dowel Pin
3 X 8mm Drill Sleeve
3 X 6mm Drill Sleeve
3 X 10mm Drill Sleeve
