FEATURES:
1. High Speed Steel blades set for accurate, fast and precision cutting.
2. Made from strong HHS high-speed-steel for durability.
3. Suitable for timber, plastic, fiberglass, aluminum & thin metal sheet, soft metal. etc.
4. An indispensable tool for carving work.
Specifications:
Maximum RPM: 20,000
Material: HSS high speed steel
Color: Silver
Dimension Details:
Mandrel Shank Size: 1/8
Inner diameter: 6.35mm
Thickness: 0.8mm
Outer diameter: 22mm* 25mm* 32mm* 35mm* 44mm* 50mm
Pole length £º 3mm
Weight:80g
Package Included:
Diameter/Thickness/Hole diameter
1x 22mm (7/8'')/0.8mm/6.35mm
1x 25mm (1'' )/0.8mm/6.35mm
1x 32mm (1-1/4 '')/0.8mm/6.35mm
1x 35mm (1-1/2 '')/0.8mm/6.35mm
1x 44mm (1-3/4'')/0.8mm/6.35mm
1x 50mm (2'')/0.8mm/6.35mm
1x 3.2mm (7/8'') mandrel
Note:
1. Do not cut the hard things, remember the safe operation is the first. Please take good protection measures.
2. Must secure the screw on the top before using it. As the electric mill is a high-speed operation tool, prevent yourself from getting cut.
3. When installed, the entire Mandrel Shank should be inserted to the end, as the electric grinding speed is pretty high, if you don't, the shaft will get bent soon or the cutting angle will be off from center.
4. At the same time, as far as possible use small diameter saw blade and low speed under the situation of meeting the usage requirements. Speed must not exceed 20,000 rpm.
5. In the selection of saw blade, the smaller your electric mill, choosing a smaller saw blade will be much stabler.
6. It suits for Mini electric mill, the diameter of the center hole is 6.35mm.
